diff --git a/docs/debugging-tests.md b/docs/debugging-tests.md
index 51a125e19..18407f688 100644
--- a/docs/debugging-tests.md
+++ b/docs/debugging-tests.md
@@ -1,6 +1,6 @@
 # Debugging Tests Tips
 
-## How to run & debug a specific test without anything else to keep the feedback loop short?
+## How to run & execute or debug a specific test without anything else to keep the feedback loop short?
 
 There is a script called debug-test.sh in the scripts folder whose parameter takes a REGEX and an optional test number.
 
@@ -10,13 +10,27 @@ For example, running the following command will output an interactive list from
 
 It will then build & run in the debugger for you.
 
+To just execute a test and get back a PASS or FAIL message run:
+
 ```bash
 ./scripts/debug-test.sh test-tokenizer
+```
+
+To test in GDB use the `-g` flag to enable gdb test mode.
+
+```bash
+./scripts/debug-test.sh -g test-tokenizer
 
 # Once in the debugger, i.e. at the chevrons prompt, setting a breakpoint could be as follows:
 >>> b main
 ```
 
+To speed up the testing loop, if you know your test number you can just run it similar to below:
+
+```bash
+./scripts/debug-test.sh test 23
+```
+
 For further reference use `debug-test.sh -h` to print help.
 
  
@@ -41,7 +55,7 @@ cmake -DCMAKE_BUILD_TYPE=Debug -DLLAMA_CUDA=1 -DLLAMA_FATAL_WARNINGS=ON ..
 make -j
 ```
 
-#### Step 3.1: Identify Test Command for Debugging
+#### Step 3: Find all tests available that matches REGEX
 
 The output of this command will give you the command & arguments needed to run GDB.
 
@@ -69,11 +83,13 @@ Labels: main
 ...
 ```
 
-So for test #1 we can tell these two pieces of relevant information:
+#### Step 4: Identify Test Command for Debugging
+
+So for test #1 above we can tell these two pieces of relevant information:
 * Test Binary: `~/llama.cpp/build-ci-debug/bin/test-tokenizer-0`
 * Test GGUF Model: `~/llama.cpp/tests/../models/ggml-vocab-llama-spm.gguf`
 
-#### Step 3.2: Run GDB on test command
+#### Step 5: Run GDB on test command
 
 Based on the ctest 'test command' report above we can then run a gdb session via this command below:
 
diff --git a/scripts/debug-test.sh b/scripts/debug-test.sh
index 231a23d69..7b2b601a9 100755
--- a/scripts/debug-test.sh
+++ b/scripts/debug-test.sh
@@ -1,117 +1,203 @@
 #!/bin/bash
-test_suite=${1:-}
-test_number=${2:-}
 
 PROG=${0##*/}
 build_dir="build-ci-debug"
 
-if [ x"$1" = x"-h" ] || [ x"$1" = x"--help" ]; then
-    echo "Usage: $PROG [OPTION]... <test_regex> (test_number)"
-    echo "Debug specific ctest program."
-    echo
-    echo "Options:"
-    echo "  -h, --help       Display this help and exit"
-    echo
-    echo "Arguments:"
-    echo "  <test_regex>     (Mandatory) Supply one regex to the script to filter tests"
-    echo "  (test_number)    (Optional) Test number to run a specific test"
-    echo
-    echo "Example:"
-    echo "  $PROG test-tokenizer"
-    echo "  $PROG test-tokenizer 3"
-    echo
-    exit 0
-fi
+# Print Color Commands
+red=$(tput setaf 1)
+green=$(tput setaf 2)
+yellow=$(tput setaf 3)
+blue=$(tput setaf 4)
+magenta=$(tput setaf 5)
+cyan=$(tput setaf 6)
+normal=$(tput sgr0)
 
-# Function to select and debug a test
-function select_test() {
-    test_suite=${1:-test}
-    test_number=${2:-}
 
-    # Sanity Check If Tests Is Detected
-    printf "\n\nGathering tests that fit REGEX: ${test_suite} ...\n"
-    tests=($(ctest -R ${test_suite} -V -N | grep -E " +Test +#[0-9]+*" | cut -d':' -f2 | awk '{$1=$1};1'))
-    if [ ${#tests[@]} -eq 0 ]
-    then
-        echo "No tests avaliable... check your compliation process..."
-        echo "Exiting."
-        exit 1
-    fi
+# Print Help Message
+####################
 
-    if [ -z $test_number ]
-    then
-        # List out avaliable tests
-        printf "Which test would you like to debug?\n"
-        id=0
-        for s in "${tests[@]}"
-        do
-            echo "Test# ${id}"
-            echo "  $s"
-            ((id++))
-        done
+print_full_help() {
+  cat << EOF
+Usage: $PROG [OPTION]... <test_regex> (test_number)
+Debug specific ctest program.
 
-        # Prompt user which test they wanted to run
-        printf "\nRun test#? "
-        read test_number
-    else
-        printf "\nUser Already Requested #${test_number}"
-    fi
+Options:
+  -h, --help            display this help and exit
+  -g                    run in gdb mode
 
-    # Start GDB with the requested test binary and arguments
-    printf "Debugging(GDB) test: ${tests[test_number]}\n"
-    # Change IFS (Internal Field Separator)
-    sIFS=$IFS
-    IFS=$'\n'
+Arguments:
+  <test_regex>     (Mandatory) Supply one regex to the script to filter tests
+  (test_number)    (Optional) Test number to run a specific test
 
-    # Get test args
-    gdb_args=($(ctest -R ${test_suite} -V -N | grep "Test command" | cut -d':' -f3 | awk '{$1=$1};1' ))
-    IFS=$sIFS
-    printf "Debug arguments: ${gdb_args[test_number]}\n\n"
-
-    # Expand paths if needed
-    args=()
-    for x in $(echo ${gdb_args[test_number]} | sed -e 's/"\/\<//' -e 's/\>"//')
-    do
-        args+=($(echo $x | sed -e 's/.*\/..\//..\//'))
-    done
-
-    # Execute debugger
-    echo "gdb args: ${args[@]}"
-    gdb --args ${args[@]}
+Example:
+  $PROG test-tokenizer
+  $PROG test-tokenizer 3
+EOF
 }
 
+abort() {
+  echo "Error: $1" >&2
+  cat << EOF >&2
+Usage: $PROG [OPTION]... <test_regex> (test_number)
+Debug specific ctest program.
+Refer to --help for full instructions.
+EOF
+  exit 1
+}
+
+
+# Dependency Sanity Check
+#########################
+
+check_dependency() {
+  command -v "$1" >/dev/null 2>&1 || {
+    abort "$1 is required but not found. Please install it and try again."
+  }
+}
+
+check_dependency ctest
+check_dependency cmake
+
+
 # Step 0: Check the args
-if [ -z "$test_suite" ]
-then
-    echo "Usage: $PROG [OPTION]... <test_regex> (test_number)"
-    echo "Supply one regex to the script to filter tests,"
-    echo "and optionally a test number to run a specific test."
-    echo "Use --help flag for full instructions"
-    exit 1
+########################
+
+if [ x"$1" = x"-h" ] || [ x"$1" = x"--help" ]; then
+  print_full_help >&2
+  exit 0
 fi
 
+# Parse command-line options
+gdb_mode=false
+while getopts "g" opt; do
+    case $opt in
+        g)
+            gdb_mode=true
+            echo "gdb_mode Mode Enabled"
+            ;;
+    esac
+done
+
+# Shift the option parameters
+shift $((OPTIND - 1))
+
+# Positionial Argument Processing : <test_regex>
+if [ -z "${1}" ]; then
+    abort "Test regex is required"
+else
+    test_suite=${1:-}
+fi
+
+# Positionial Argument Processing : (test_number)
+test_number=${2:-}
+
+
 # Step 1: Reset and Setup folder context
+########################################
+
 ## Sanity check that we are actually in a git repo
 repo_root=$(git rev-parse --show-toplevel)
 if [ ! -d "$repo_root" ]; then
-    echo "Error: Not in a Git repository."
-    exit 1
+    abort "Not in a Git repository."
 fi
 
-## Reset folder to root context of git repo
-pushd "$repo_root" || exit 1
+## Reset folder to root context of git repo and Create and enter build directory
+pushd "$repo_root"
+rm -rf "$build_dir" && mkdir "$build_dir" || abort "Failed to make $build_dir"
 
-## Create and enter build directory
-rm -rf "$build_dir" && mkdir "$build_dir" || exit 1
 
 # Step 2: Setup Build Environment and Compile Test Binaries
-cmake -B "./$build_dir" -DCMAKE_BUILD_TYPE=Debug -DLLAMA_CUDA=1 -DLLAMA_FATAL_WARNINGS=ON || exit 1
-pushd "$build_dir" && make -j || exit 1
+###########################################################
 
-# Step 3: Debug the Test
-select_test "$test_suite" "$test_number"
+# Note: test-eval-callback requires -DLLAMA_CURL
+cmake -B "./$build_dir" -DCMAKE_BUILD_TYPE=Debug -DLLAMA_CUDA=1 -DLLAMA_CURL=1 || abort "Failed to build enviroment"
+pushd "$build_dir"
+make -j || abort "Failed to compile"
+popd > /dev/null || exit 1
 
-# Step 4: Return to the directory from which the user ran the command.
-popd || exit 1
-popd || exit 1
-popd || exit 1
+
+# Step 3: Find all tests available that matches REGEX
+####################################################
+
+# Ctest Gather Tests
+# `-R test-tokenizer` : looks for all the test files named `test-tokenizer*` (R=Regex)
+# `-N` : "show-only" disables test execution & shows test commands that you can feed to GDB.
+# `-V` : Verbose Mode
+printf "\n\nGathering tests that fit REGEX: ${test_suite} ...\n"
+pushd "$build_dir"
+tests=($(ctest -R ${test_suite} -V -N | grep -E " +Test +#[0-9]+*" | cut -d':' -f2 | awk '{$1=$1};1'))
+if [ ${#tests[@]} -eq 0 ]; then
+    abort "No tests avaliable... check your compliation process..."
+fi
+popd > /dev/null || exit 1
+
+
+# Step 4: Identify Test Command for Debugging
+#############################################
+
+# Select test number
+if [ -z $test_number ]; then
+    # List out avaliable tests
+    printf "Which test would you like to debug?\n"
+    id=0
+    for s in "${tests[@]}"
+    do
+        echo "Test# ${id}"
+        echo "  $s"
+        ((id++))
+    done
+
+    # Prompt user which test they wanted to run
+    printf "\nRun test#? "
+    read test_number
+
+else
+    printf "\nUser Already Requested #${test_number}\n"
+
+fi
+
+# Grab all tests commands
+pushd "$build_dir"
+sIFS=$IFS # Save Initial IFS (Internal Field Separator)
+IFS=$'\n' # Change IFS (Internal Field Separator) (So we split ctest output by newline rather than by spaces)
+test_args=($(ctest -R ${test_suite} -V -N | grep "Test command" | cut -d':' -f3 | awk '{$1=$1};1' )) # Get test args
+IFS=$sIFS # Reset IFS (Internal Field Separator)
+popd > /dev/null || exit 1
+
+# Grab specific test command
+single_test_name="${tests[test_number]}"
+single_test_command="${test_args[test_number]}"
+
+
+# Step 5: Execute or GDB Debug
+##############################
+
+printf "${magenta}Running Test #${test_number}: ${single_test_name}${normal}\n"
+printf "${cyan}single_test_command: ${single_test_command}${normal}\n"
+
+if [ "$gdb_mode" = "true" ]; then
+    # Execute debugger
+    pushd "$repo_root" || exit 1
+    eval "gdb --args ${single_test_command}"
+    popd > /dev/null || exit 1
+
+else
+    # Execute Test
+    pushd "$repo_root" || exit 1
+    eval "${single_test_command}"
+    exit_code=$?
+    popd > /dev/null || exit 1
+
+    # Print Result
+    printf "${blue}Ran Test #${test_number}: ${single_test_name}${normal}\n"
+    printf "${yellow}Command: ${single_test_command}${normal}\n"
+    if [ $exit_code -eq 0 ]; then
+        printf "${green}TEST PASS${normal}\n"
+    else
+        printf "${red}TEST FAIL${normal}\n"
+    fi
+
+fi
+
+# Return to the directory from which the user ran the command.
+popd > /dev/null || exit 1