* feat(gguf-py): Add Granite model and params to gguf-py
Branch: GraniteLM
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* feat(convert_hf_to_gguf): Add registration and param setup for Granite
Branch: GraniteLM
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* feat(llama.cpp): Add config parsing for Granite multiplier params
Branch: GraniteLM
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* feat(llama.cpp): First pass at full port of granite deviations from llama
Something is still not working right since the results are mostly terrible,
but on occasion it's producing relevant results at this point, so
_something_ is working.
Branch: GraniteLM
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* fix(llama.cpp): Determine granite language 3b instruct by vocab size
Branch: GraniteLM
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* fix(convert_hf_to_gguf): Use LlamaModel as base for GraniteModel
The defaults in LlamaModel are needed for Granite as well
Branch: GraniteLM
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* fix(llama.cpp): Switch Granite param names to use _scale for consistency
Other scalar multipliers are called *_scale, so this provides a more
consistent naming convention.
Branch: GraniteLM
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* fix(convert_hf_to_gguf/gguf-py): _multiplier -> _scale
The transformers names with _multiplier will now be converted to the _scale
equivalent during conversion.
Branch: GraniteLM
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* fix(llama.cpp): Use separate switch clause for granite in llm_load_hparams
Branch: GraniteLM
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
---------
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* ggml-quants : 1.625 bpw ternary packing for BitNet 1.58b
* ggml-quants : faster 1.625 bpw AVX2 vec_dot
Not using a lookup table anymore makes it match q4_0 speed.
* gguf-py : fix formatting
* llama : remove spaces on empty line
* ggml-quants : subtract 1 when back in epi8
This makes the 1.625 bpw type go faster than q4_0. Still not the fastest.
* ggml-quants : Q2_2 now faster than Q4_K on with AVX2
* ggml-quants : cleanup Q1_3 code formatting
* ggml-quants : ARM NEON vec_dot for q2_2 and q1_3
* ggml-quants : use ceiling division when quantizing q1_3
* convert-hf : simplify BitNet pre-quantization
This still results in the exact same tensor weights and scales,
but it reveals some weirdness in the current algorithm.
* convert-hf : allow converting the weird BitNet 1.3B
Its FFN size is 5460 which is not convenient.
The offending tensors are kept in F16,
which makes the final model 5.01 bpw.
* bitnet : replace 1.58b with b1.58, as in the paper
* ggml-quants : fix build failure on Windows
* ggml-quants : attempt to fix Arm 32-bit support
* ggml : add some informative comments in q1_3 vec_dot
* ggml : add TQ1_0 and TQ2_0 ternary quantization types
* ggml : even faster TQ2_0
* ggml : also faster TQ1_0
Same optimization as for TQ2_0 by offsetting the sum instead of the weights.
This makes TQ1_0 almost as fast as Q8_0 on AVX2.
* ggml : fix build issues in certain environments
* ggml : add NEON vec_dot implementation for TQ1_0 and TQ2_0
* ggml : avoid directly using vmlal_high_s8, for 32-bit ARM compat
The compiler seems smart enough to use the same instruction
even when using vget_high_s8 instead.
* ggml : remove q1_3 and q2_2
No more 1.625 bpw and 2.000 bpw,
now instead using 1.6875 bpw and 2.0625 bpw
with TQ1_0 and TQ2_0, respectively.
* llama : remove the separate scale tensors of BitNet b1.58
They won't be needed, since the remaining ternary quant types have
built-in scales.
* ggml-quants : rename fields of TQ1_0 and TQ2_0 structs for consistency
* ggml-quants : allow using vdotq_s32 in TQ2_0 vec_dot
Not yet tested on hardware which supports it,
might not work or might not even compile. But also it might.
It should make the performance better on recent ARM CPUs.
* ggml-quants : remove comment about possible format change of TQ2_0
Making it slightly more convenient for AVX512
but less convenient for everything else is not worth the trouble.
* gguf-py : Numpy (de)quantization for TQ1_0 and TQ2_0
* ggml-quants : use roundf instead of nearest_int for TQ1_0 and TQ2_0
This does not change anything for ternary models,
since their values should never end up being in halfway cases anyway.
* convert : allow direct conversion to TQ1_0 and TQ2_0
The token embeddings and output tensors are kept in F16
to allow quantizing them to Q4_K and Q6_K with llama-quantize.
* llama : handle fallback for TQ1_0 and TQ2_0 with Q4_0
Q4_0 is not completely symmetric (so not lossless for ternary models),
but it should be good enough.
* ggml-quants : allow using ARM dot product instructions for TQ1_0
* ggml-quants : deduplicate TQ1_0 and TQ2_0 __ARM_FEATURE_DOTPROD support
* ggml : remove unused ggml_mul special case
It would otherwise conflict with the more general
optimization coming with Mamba-2.
* ggml : handle TQ1_0 and TQ2_0 in dequantization-based operators
* test-backend-ops : add TQ1_0 and TQ2_0 comments for later
Not yet adding uncommented, because some backends like SYCL and Metal
do not properly handle unknown types in supports_op for GGML_OP_MUL_MAT.
(and Metal also doesn't handle it with GGML_OP_GET_ROWS)
Support for TQ1_0 and TQ2_0 for other backends than CPU
will be added in follow-up pull requests.
* gguf-py : add T5ENCODER model architecture
* common : call llama_decode() during warmup only if the model has decoder
* convert-hf : add T5EncoderModel
* llama : add llama_model_has_decoder() API function
* llama : split build_t5() into build_t5_encoder() and build_t5_decoder()
* llama : add support for LLM_ARCH_T5ENCODER
* llama-embedding : add support for LLAMA_POOLING_TYPE_NONE
* llama-embedding : add support for encoder-only models
---------
Co-authored-by: Stanisław Szymczyk <sszymczy@gmail.com>
* gguf-py : use classes for quants
* convert_hf : simplify internal quantization type selection
* gguf-py : fix flake8 lint
* gguf-py : fix BF16 numpy view type
* gguf-py : remove LlamaFileTypeMap
Too specific to 'llama.cpp', and would be a maintenance burden
to keep up to date.
* gguf-py : add generic quantize and dequantize functions
The quant classes no longer need to be known,
only the target or the source type,
for 'quantize' and 'dequantize', respectively.
* gguf-py, llama : add constants and methods related to Llama-3.1 <|eom_id|> token
* llama : find Llama-3.1 <|eom_id|> token id during vocab loading
* llama-vocab : add Llama-3.1 <|eom_id|> token to the set of tokens stopping the generation
---------
Co-authored-by: Stanisław Szymczyk <sszymczy@gmail.com>
Main thing is that the default output filename will take this form
{name}{parameters}{finetune}{version}{encoding}{kind}
In addition this add and remove some entries in the KV store and adds a metadata class with automatic heuristics capability to derive some values based on model card content
* No Change:
- Internal GGUF Spec
- `general.architecture`
- `general.quantization_version`
- `general.alignment`
- `general.file_type`
- General Model Details
- `general.name`
- `general.author`
- `general.version`
- `general.description`
- Licensing details
- `general.license`
- Typically represents the converted GGUF repo (Unless made from scratch)
- `general.url`
- Model Source during conversion
- `general.source.url`
* Removed:
- Model Source during conversion
- `general.source.huggingface.repository`
* Added:
- General Model Details
- `general.organization`
- `general.finetune`
- `general.basename`
- `general.quantized_by`
- `general.size_label`
- Licensing details
- `general.license.name`
- `general.license.link`
- Typically represents the converted GGUF repo (Unless made from scratch)
- `general.doi`
- `general.uuid`
- `general.repo_url`
- Model Source during conversion
- `general.source.doi`
- `general.source.uuid`
- `general.source.repo_url`
- Base Model Source
- `general.base_model.count`
- `general.base_model.{id}.name`
- `general.base_model.{id}.author`
- `general.base_model.{id}.version`
- `general.base_model.{id}.organization`
- `general.base_model.{id}.url` (Model Website/Paper)
- `general.base_model.{id}.doi`
- `general.base_model.{id}.uuid`
- `general.base_model.{id}.repo_url` (Model Source Repository (git/svn/etc...))
- Array based KV stores
- `general.tags`
- `general.languages`
- `general.datasets`
---------
Co-authored-by: compilade <git@compilade.net>
Co-authored-by: Xuan Son Nguyen <thichthat@gmail.com>
* lora: load to devide buft
* add patch tensor function
* correct tensor patch
* llama_lora_adapter_apply
* correct ggml_backend_tensor_copy
* add llm_build_mm
* fix auto merge
* update based on review comments
* add convert script
* no more transpose A
* add f16 convert
* add metadata check
* add sanity check
* fix ftype
* add requirements
* fix requirements
* fix outfile
* conversion: only allow selected models
* fix types
* cuda : do not use dmmv if the tensor does not have enough cols
* llama : lora fixes
* do not disable mmap with lora
Co-authored-by: slaren <slarengh@gmail.com>
* llm_build_lora_mm_id
* convert_lora : MoE LoRA conversion support
* convert_lora : prefer safetensors, similarly to convert_hf
* convert_hf : simplify modify_tensors for InternLM2
* convert_lora : lazy conversion
* llama : load and use alpha from LoRA adapters
* llama : use llm_build_lora_mm in most model graphs
* auto scale
* Revert "auto scale"
This reverts commit 42415a4874.
* remove redundant params
* Apply suggestions from code review
Co-authored-by: slaren <slarengh@gmail.com>
* change kv metadata
* move add_type to __init__
* convert_hf : move add_type to main()
* convert_lora : use the GGUFWriter from Model instead of overwriting it
---------
Co-authored-by: slaren <slarengh@gmail.com>
Co-authored-by: Francis Couture-Harpin <git@compilade.net>
* add chatglm3-6b model support huggingface model:
https://hf-mirror.com/THUDM/chatglm3-6b
Signed-off-by: XingXing Qiao <qiaoxx@dingdao.com>
* remove .rotary_pos_emb.inv_freq and unuse code for chatglm3 model
Signed-off-by: XingXing Qiao <qiaoxx@dingdao.com>
* fix lint error
Signed-off-by: XingXing Qiao <qiaoxx@dingdao.com>
* optimize convert-hf-to-gguf.py for chatglm model
Signed-off-by: XingXing Qiao <qiaoxx@dingdao.com>
* support glm-4-9b-chat
Signed-off-by: XingXing Qiao <qiaoxx@dingdao.com>
* fix eos tokens to glm4
* remove unused log
* add preprocess to chatglm3 and chatglm4
* add eos_id_list to llama.cpp
* fix code style
* fix code style
* fix conflicts
* fix conflicts
* Revert "add eos_id_list to llama.cpp"
This reverts commit 3a4d5790bf.
* set <|endoftext|> as eos and <|user|> as eot
* fix chat template bug
* add comment to glm prefix and suffix
* fix conflicts and add rope_ratio & ChatGLMForConditionalGeneration
* fix chat template bug
* fix codestyle
* fix conflicts
* modified the general name of glm model
* fix conflicts
* remove prefix and suffix
* use normal glm4 chattempalte & use LLM_FFN_SWIGLU in phi3
* fix: resolve Flake8 errors in `convert-hf-to-gguf.py`
- Fix E302 by adding two blank lines before top-level function definitions
- Replace print statements to fix NP100
- Fix E303 by ensuring only one blank line between lines of code
* fix rope ratio to solve incorrect answers
* fix by comments
---------
Signed-off-by: XingXing Qiao <qiaoxx@dingdao.com>
Co-authored-by: XingXing Qiao <qiaoxx@dingdao.com>
Co-authored-by: Umpire2018 <138990495+Umpire2018@users.noreply.github.com>
* Initial OpenELM support (270M only so far)
* Fill out missing entries in llama_model_type_name
* fixup! Initial OpenELM support (270M only so far)
Fix formatting
* llama : support all OpenELM models
* llama : add variable GQA and variable FFN sizes
Some metadata keys can now also be arrays to support setting
their value per-layer for models like OpenELM.
* llama : minor spacing changes
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* llama : use std::array for per-layer hparams
* llama : fix save/load state
* llama : do not print hparams for vocab-only models
* llama : handle n_head == 0
* llama : use const ref for print_f and fix division by zero
* llama : fix t5 uses of n_head and n_ff
* llama : minor comment
---------
Co-authored-by: Francis Couture-Harpin <git@compilade.net>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Add attention and final logit softcapping.
* fix
* Add custom add_ functions
* Disable flash attention for Gemma2
* Update src/llama.cpp
Co-authored-by: slaren <slarengh@gmail.com>
* Add default value for attention and final logit softcap value
* Add custom kq scaling from Gemma2Attention
* Remove custom pre attention scaling and use computed value instead.
---------
Co-authored-by: slaren <slarengh@gmail.com>
* Inference support for Gemma 2 model family
* Update convert-hf-to-gguf.py, constants, and tensor mappings
* cleanup
* format fix
* Fix special token vocab bug
* Don't add space prefix
* fix deleted lines
* Update src/llama.cpp
Co-authored-by: slaren <slarengh@gmail.com>
* Add model type names
* Add control vector
* Fix model type identification
---------
Co-authored-by: Andrei Betlen <abetlen@gmail.com>
Co-authored-by: slaren <slarengh@gmail.com>
* support splits in convert.py
* Support split by size and dry run to write estimated shards/filesizes
* Move split functionality to new GGUFManager class
* fix improper function signature
* tentative push of convert-hf-to-gguf support
* resolve merge + SplitArguments for easier parsing
* Fix eager tensor memory leak and remove convert.py changes
Removed a memory leak caused by unexpected reference retention to eager tensors.
Also removed GGUFManager functionality in convert.py in favor of specializing for convert-hf-to-gguf.py.
* refactor SplitStrategy to be a deque
Instead of having SplitStrategy have a `data` field that is a deque, just have SplitStrategy be a subclass of deque itself.
* fix Q8 quantization
* remove unnecessary imports in gguf_manager
* fix final? merge issue
* fix gguf_writer placement and remove comments
* oops, actually fix gguf_writer placement
* reduce duplicated code from gguf_writer
* further simplify GGUFManager
* simplify even further and standardize with GGUFWriter
* reduce diffs with master
* form shards while adding tensors, SHA256 sums agree with master
* re-add type hint
Co-authored-by: compilade <git@compilade.net>
* GGUFWriter compatibility fix
Co-authored-by: compilade <git@compilade.net>
* Shard dataclass and un-negative dont_add_architecture
* type consistency in format_n_bytes_to_str
* move kv keys to constants.py
* make pathlib explicit
* base-1024 bytes to base-1000
* rename GGUFManager to GGUFWriterSplit
* Update gguf-py/gguf/constants.py
Co-authored-by: compilade <git@compilade.net>
* fix convert-hf-to-gguf.py permissions
* fix line endings
* Update gguf-py/gguf/gguf_writer_split.py
Co-authored-by: compilade <git@compilade.net>
* convert-hf : restore executable file permission
* examples/convert-legacy-llama.py: restore executable file permission
* reinstate original gguf package import and fix type annotation
* attempt to appease the linter
* attempt 2 to appease the linter
* attempt 3 to appease the linter
* comma consistency
* Update convert-hf-to-gguf.py
Co-authored-by: compilade <git@compilade.net>
* edit cmd line args
* use simplification from #7827
* kv/ti data are still wrong
* try to refactor kv data (still fails)
* fix ti data messiness
* tidy up
* fix linting
* actually make the linter happy
* cleanup round 1
* remove SplitStrategy, SplitArguments
* appease linter
* fix typing and clean up
* fix linting
* Update gguf-py/gguf/gguf_writer.py
Co-authored-by: compilade <git@compilade.net>
* progress bar, fix split logic
* Update gguf-py/gguf/gguf_writer.py
Co-authored-by: compilade <git@compilade.net>
* catch oversights
* Update gguf-py/gguf/gguf_writer.py
Co-authored-by: compilade <git@compilade.net>
* Update gguf-py/gguf/gguf_writer.py
Co-authored-by: compilade <git@compilade.net>
* Update gguf-py/gguf/gguf_writer.py
Co-authored-by: compilade <git@compilade.net>
* Update gguf-py/gguf/gguf_writer.py
Co-authored-by: compilade <git@compilade.net>
* Update gguf-py/gguf/gguf_writer.py
Co-authored-by: compilade <git@compilade.net>
* swap bar orders
* Update gguf-py/gguf/gguf_writer.py
Co-authored-by: compilade <git@compilade.net>
* Update gguf-py/gguf/gguf_writer.py
Co-authored-by: compilade <git@compilade.net>
* compatibility fix
* Update gguf-py/gguf/gguf_writer.py
Co-authored-by: compilade <git@compilade.net>
* Update convert-hf-to-gguf.py
Co-authored-by: compilade <git@compilade.net>
---------
Co-authored-by: Brian <mofosyne@gmail.com>
Co-authored-by: compilade <git@compilade.net>
* gguf-py : add T5 model architecture
* gguf-py : add separate tensors for encoder and decoder
* gguf-py : add new model header parameters: decoder_start_token_id, attention.relative_buckets_count, tokenizer.ggml.remove_extra_whitespaces, tokenizer.ggml.precompiled_charsmap
* convert-hf : add model conversion support for T5ForConditionalGeneration and T5WithLMHeadModel
---------
Co-authored-by: Stanisław Szymczyk <sszymczy@gmail.com>
* update: convert-hf-to-gguf.py to support Qwen2-57B-A14B
* fix: QWEN2MOE support for expert_feed_forward_length
previously, expert ff was taken from n_ff (intermediate size) but it is now properly taken from LLM_KV_EXPERT_FEED_FORWARD_LENGTH
n_ff_exp and n_ff_shared_exp are now properly calculated
* update: convert-hf-to-gguf.py cleanup for Qwen2MoeForCausalLM
* fix: QWEN2MOE support for expert_feed_forward_length
previously, expert ff was taken from n_ff (intermediate size) but it is now properly taken from LLM_KV_EXPERT_FEED_FORWARD_LENGTH
n_ff_exp and n_ff_shexp are now properly calculated
* feat: add changes to handle jina v2 base code
* fix: do not complicate things
* fix: fix the usage of the code model
* fix: fix comments
* fix: fix linting issues
* fix: remove ollama patches
* style : minor
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* common : increase max number of experts to 160
* common : add tensors ATTN_Q_A, ATTN_Q_A_NORM, ATTN_Q_B, ATTN_KV_A_MQA, ATTN_KV_A_NORM, ATTN_KV_B needed by DeepSeek-V2 MLA (multi-head latent attention) architecture
* common : add model header parameters: leading_dense_block_count, expert_feed_forward_length, expert_shared_count, expert_weights_scale, attention.q_lora_rank, attention.kv_lora_rank, rope.scaling.yarn_log_multiplier
* convert-hf : add model conversion support for DeepseekV2ForCausalLM
* llama : add model types for DeepSeek-V2 and DeepSeek-V2-Lite models
* llama : add two new llm_build_moe_ffn() arguments: scale_w (whether to scale weights of selected MoE experts) and w_scale (numerical value of the scaling factor)
* llama : add inference support for LLM_ARCH_DEEPSEEK2
---------
Co-authored-by: Stanisław Szymczyk <sszymczy@gmail.com>
* common : increase max number of experts to 128
* common : add tensor LLM_TENSOR_FFN_NORM_EXPS for normalization before MoE that runs in parallel to attention + ffn
* gguf-py : add architecture-specific block mappings that override selected general block mappings
* convert-hf : add model conversion support for ArcticForCausalLM
* convert-hf : use added_tokens_decoder from tokenizer_config.json to redefine tokens from SentencePiece model (only for ArcticForCausalLM)
* llama : add inference support for LLM_ARCH_ARCTIC
---------
Co-authored-by: Stanisław Szymczyk <sszymczy@gmail.com>
* add phi3 128k support in convert-hf-to-gguf
* add phi3 128k support in cuda
* address build warnings on llama.cpp
* adjust index value in cuda long rope freq factors
* add long rope support in ggml cpu backend
* make freq factors only depend on ctx size
* remove unused rope scaling type 'su' frin gguf converter
* fix flint warnings on convert-hf-to-gguf.py
* set to the short freq factor when context size is small than trained context size
* add one line of comments
* metal : support rope freq_factors
* ggml : update ggml_rope_ext API to support freq. factors
* backends : add dev messages to support rope freq. factors
* minor : style
* tests : update to use new rope API
* backends : fix pragma semicolons
* minor : cleanup
* llama : move rope factors from KV header to tensors
* llama : remove tmp assert
* cuda : fix compile warning
* convert : read/write n_head_kv
* llama : fix uninitialized tensors
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* convert-hf : support bfloat16 conversion
* gguf-py : flake8 fixes
* convert-hf : add missing space after comma
* convert-hf : get bit-exact same output as ./quantize
The quantization version was missing.
* convert-hf : don't round bf16 NANs
* convert-hf : save some memory with np.int16 intermediate bf16 weights
* convert-hf : more closely match llama.cpp with which weights to keep in f32
* convert-hf : add --outtype auto-f16
A reason for this to exist is for model quantizers who want an initial
GGUF with the most fidelity to the original model while still using
a 16-bit float type instead of 32-bit floats.
* convert-hf : remove a semicolon because flake8 doesn't like it
It's a reflex from when programming in C/C++, I guess.
* convert-hf : support outtype templating in outfile name
* convert-hf : rename --outtype auto-f16 to --outtype auto
* feat: first things to do
* feat: create tensors for Jina architecture
* fix: use other tensors
* feat: embedding gets results
* fix: fix usage of ALIBI
* fix: clean prints
* fix: do some cleanup unused vars
* fix: revert changes to Makefile and CMakeLists
* fix: revert some changes
* fix: fix small detail
* fix: fix convert formatting
* fix: fix linting and editor
* feat: set proper vocab settings
* fix: JinaBertForMaskedLM registration
* feat: support q_normalization and k_normalization in Jina arch
* feat: handle gpt2 tokenizer with Jina architecture
* feat: example comments in embedding
* feat: rename Jina Bert to Jina Bert V2
* fix: add some changes as per review
* feat: proper KQ_pos for Jina embeddings
* feat: add capacity to load models ES and DE for Spanish
* llama : fix pre-tokenizers
* ggml : full ALiBi support
* ggml : update ggml_soft_max_ext() CUDA, SYCL
* ggml : ggml_flash_attn_ext() support ALiBi (CPU)
* ggml : ggml_flash_attn_ext() support ALiBi (Metal)
* ggml : fix warning
* ggml : ggml_flash_attn_ext() support ALiBi (CUDA)
ggml-ci
* minor : clean-up
* embedding : add warning about missing SEP
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* convert-hf : begin refactoring write_tensor
* convert : upgrade to sentencepiece v0.2.0
* convert-hf : remove unused n_dims in extra_*_tensors
* convert-hf : simplify MoE weights stacking
* convert-hf : flake8 linter doesn't like semicolons
* convert-hf : allow unusual model part names
For example, loading `model-00001-of-00001.safetensors` now works.
* convert-hf : fix stacking MoE expert tensors
`torch.stack` and `torch.cat` don't do the same thing.
* convert-hf : fix Mamba conversion
Tested to work even with a SentencePiece-based tokenizer.
* convert : use a string for the SentencePiece tokenizer path
* convert-hf : display tensor shape
* convert-hf : convert norms to f32 by default
* convert-hf : sort model part names
`os.listdir` is said to list files in arbitrary order.
Sorting the file names should let "model-00009-of-00042.safetensors"
be loaded before "model-00010-of-00042.safetensors".
* convert-hf : use an ABC for Model again
It seems Protocol can't be used as a statically type-checked ABC,
because its subclasses also can't be instantiated. (why did it seem to work?)
At least there's still a way to throw an error when forgetting to define
the `model_arch` property of any registered Model subclasses.
* convert-hf : use a plain class for Model, and forbid direct instantiation
There are no abstract methods used anyway,
so using ABC isn't really necessary.
* convert-hf : more consistent formatting of cmdline args
* convert-hf : align the message logged for converted tensors
* convert-hf : fix Refact conversion
* convert-hf : save memory with lazy evaluation
* convert-hf : flake8 doesn't like lowercase L as a variable name
* convert-hf : remove einops requirement for InternLM2
* convert-hf : faster model parts loading
Instead of pre-loading them all into a dict, iterate on the tensors
in the model parts progressively as needed in Model.write_tensors
Conversion for some architectures relies on checking for the presence
of specific tensor names, so for multi-part models, the weight map is read
from the relevant json file to quickly get these names up-front.
* convert-hf : minor changes for consistency
* gguf-py : add tqdm as a dependency
It's small, and used for a progress bar
in GGUFWriter.write_tensors_to_file
* Introduce bfloat16 support
Many models on Hugging Face (e.g. Mistral, TinyLLaMA) use bfloat16 as
their canonical floating point format.
┌sign
│
│ ┌exponent
│ │
│ │ ┌mantissa
│ │ │
│┌──┴───┐┌─┴───┐
0b0000000000000000 brain16
This encoding has the same number of exponent bits as float32. That
makes conversion relatively straightforward, even in the absence of
hardware support. For example, converting brain16 to binary32 means
simply shifting 16 bits to the left.
┌sign
│
│ ┌exponent
│ │
│ │ ┌mantissa
│ │ │
│┌──┴───┐┌─┴───────────────────┐
0b00000000000000000000000000000000 IEEE binary32
The issue is that converting bf16 to fp16 can result in information
loss. Only 13% of bf16 numbers can be precisely represented in fp16
which in practice ends up being 99.71% of Mistral 7b v0.2's weights
however there is currently no way other than fp32 to get the others
┌sign
│
│ ┌exponent
│ │
│ │ ┌mantissa
│ │ │
│┌─┴─┐┌─┴──────┐
0b0000000000000000 IEEE binary16
This change fixes that, by adding a bf16 data type to GGML. Support
for CPU inference has been implemented along with optimizations for
the AVX2, AVX512, and AVX512BF16 ISAs. Perplexity on Mistral 7b 0.2
improves somewhere around -0.0024 to -0.0046 compared to using fp16
* Remove GGML code that's not needed
* Minimize the GGML API surface area for BF16
* Remove bf16 luts
* Make the GGML header look nicer
* Fix documentation
* Apply ggerganov's fixes for test-backend-ops
* Add BF16 code for new ggml_validate_row_data() function
* convert.py: add python logging instead of print()
* convert.py: verbose flag takes priority over dump flag log suppression
* convert.py: named instance logging
* convert.py: use explicit logger id string
* convert.py: convert extra print() to named logger
* convert.py: sys.stderr.write --> logger.error
* *.py: Convert all python scripts to use logging module
* requirements.txt: remove extra line
* flake8: update flake8 ignore and exclude to match ci settings
* gh-actions: add flake8-no-print to flake8 lint step
* pre-commit: add flake8-no-print to flake8 and also update pre-commit version
* convert-hf-to-gguf.py: print() to logger conversion
* *.py: logging basiconfig refactor to use conditional expression
* *.py: removed commented out logging
* fixup! *.py: logging basiconfig refactor to use conditional expression
* constant.py: logger.error then exit should be a raise exception instead
* *.py: Convert logger error and sys.exit() into a raise exception (for atypical error)
* gguf-convert-endian.py: refactor convert_byteorder() to use tqdm progressbar
* verify-checksum-model.py: This is the result of the program, it should be printed to stdout.
* compare-llama-bench.py: add blank line for readability during missing repo response
* reader.py: read_gguf_file() use print() over logging
* convert.py: warning goes to stderr and won't hurt the dump output
* gguf-dump.py: dump_metadata() should print to stdout
* convert-hf-to-gguf.py: print --> logger.debug or ValueError()
* verify-checksum-models.py: use print() for printing table
* *.py: refactor logging.basicConfig()
* gguf-py/gguf/*.py: use __name__ as logger name
Since they will be imported and not run directly.
* python-lint.yml: use .flake8 file instead
* constants.py: logger no longer required
* convert-hf-to-gguf.py: add additional logging
* convert-hf-to-gguf.py: print() --> logger
* *.py: fix flake8 warnings
* revert changes to convert-hf-to-gguf.py for get_name()
* convert-hf-to-gguf-update.py: use triple quoted f-string instead
* *.py: accidentally corrected the wrong line
* *.py: add compilade warning suggestions and style fixes
* Support converting models with multiple chat templates
Adds the following metadata:
* tokenizer.chat_templates
* tokenizer.chat_template.<name1>
* tokenizer.chat_template.<name2>
* tokenizer.chat_template.<...>
Where `tokenizer.chat_templates` is an array of the template names (except `default`), `default` is added to the regular `tokenizer.chat_template`.
* replace filtered characters with underscore
* New script to add/modify/remove metadata
This scripts creates a copy of a GGUF file and allows you to add/modify/remove metadata in the process.
Most importantly this allows you to update chat templates, either as a string or directly from an updated tokenizer_config.json file.
* Add files via upload
add new script to project/readme
* flake--
* StableLM2 12B support for huggingface -> GGUF
* StableLM12 tensormapping and constants
* StableLM-2-12b model support
* fix
* Added 12B support
* Removed autoformatting; resolved bug where model_arch was not selecting StableLM2
* Formatting
* Do QK norm stacking in model conversion step
* Converge StableLM and StableLM2 code to simplify graph construction
* Fix accidental removal
* Removed warnings
* Revert formatter
* Move QK norm stack to private function so it's easier to read
* refactor stablelm graph builder to support 1.6, 3b and 12b more efficiently
* Proper check for None type for new_name to avoid crash; formatting; revert change to base class `write_tensors()`
* Format
* Formatting
* format
Co-authored-by: compilade <git@compilade.net>
* Fix incorrect check for K norm
* space after commas; Keep indentation multiple of 4 spaces
* Flake8 format
* Removed unnecessary conditional branches
* Removed unused comment
* Fixed incorrect tensor passing
* Format
---------
Co-authored-by: compilade <git@compilade.net>
* support qwen2moe
* fix-review
* metal : support unary ops for nelements % 4 != 0
* metal : require contiguousness for float4 unary kernels
* metal : require contiguousness for float4 unary kernels (cont)
* fix-review
* names : for brevity "SHARED_EXP" -> "SHEXP"
* llama : reuse build_moe_ffn()
* llama : add model type name
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
This commit adds special token metadata for Fill-In-the-Middle
(FIM)/Infill to the GGUF model.
The motivation for this is that currently there is support for CodeLlama
but other models exist now like CodeGemma, but the different models use
different token ids for the special tokens and this commit allows for
supporting multiple models.
Signed-off-by: Daniel Bevenius <daniel.bevenius@gmail.com>
* Add Command R Plus GGUF
* Add Command R Plus GGUF
* Loading works up to LayerNorm2D
* Export new tensors in 1D so they are not quantized.
* Fix embedding layer based on Noeda's example
* Whitespace
* Add line
* Fix unexpected tokens on MPS. Re-add F16 fix. ((Noeda)
* dranger003: Fix block index overflow in CUDA dequantizing.
* Reverted blocked multiplication code as it still has issues and could affect other Llama arches
* export norms as f32
* fix overflow issues during quant and other cleanup
* Type convention
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* dranger003: Fix more int overflow during quant.
---------
Co-authored-by: S <seast@Ss-Mac-Studio.local>
Co-authored-by: S <s@example.com>
Co-authored-by: slaren <slarengh@gmail.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* initial commit for sealion support
* add sealion support
* minor fix
* q/k ln and pos_embd only if required
* Apply suggestions from code review
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* minor : clear whitespaces
---------
Co-authored-by: bryan <bryansiow@aisingapore.org>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* ggml : update mul_mat_id to use the same tensor for all the experts
* update cuda
* minor
* update metal
* update test-backend-ops
* fix cuda
* Update ggml-metal.m
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* update convert.py
* update convert-hf-to-gguf.py
* update convert.py for mixtral hf models
* Update convert-hf-to-gguf.py
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* cuda : support non-pow-2 number of experts
* allow quantize to work for split and merged experts models in the same way
* cleanup + disable mmap automatically with split tensors models
* update imatrix
* test-backend-ops : test qwen argsort
* update grok model loading
* llama : add merged experts tensors to the grok tensor map
* minor
* gguf : bump version
* fix quantizing of merged experts
* convert-hf-to-gguf.py : update grok (untested)
* make linter happy
* cuda/argsort : use shared memory instead of pool memory
* convert : fix grok tensor names
* metal : add support for non-pow-2 argsort
* llama : more loader cleanup, better error checking
* cuda : fix warning
* llama : still use mmap for loading old models, but copy the data to a host buffer
* add review note
* llama : remove ffn tensor counting + add sanity check
ggml-ci
* convert : fix handling of n_experts == None
ggml-ci
* imatrix : fix ncall counters
* llama : produce error if imatrix size does not match
* quantize : terminate on errors + trace logs
ggml-ci
* metal : pad shared memory to 16 bytes
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Support xverse model convert to gguf format.
* 1. Convert xverse models to gguf;
2. Add LLM_ARCH_XVERSE inference in llama.cpp;
3. Add xverse item in Supported models in README.md;
* * gguf-py: remove redundant logs
* llama: remove the init_mapping_prefetch custom parameter
* llama.cpp: Include the changes from #6122 to exclude the unused outputs of the last layers.
* - Fix format issues
- Remove duplicate set kqv_out to llm_build_kv
* Update llama.cpp
---------
Co-authored-by: willhe <willhe@xverse.cn>
Co-authored-by: willhe <hexin@xverse.cn>
* iq1_m: basics
* iq1_m: basics-2
* iq1_m: CUDA dequantize works
Very 1st shot I get PPL = 9.76 for LLaMA-v2-7B.
* iq1_m: separate shifts for each group of 8 in a block
We get
PPL(LLaMA-v2-7B ) = 9.2810
PPL(LLaMA-v2-13B) = 6.8105
Not bad, but slightly higher than
sqrt(PPL(IQ1_S) * PPL(IQ2_XXS))
which is the expected outcome given that IQ1_M is
halfway between IQ1_S and IQ2_XXS in terms of bpw.
From this, we would expect
PPL = 9.14 for LLaMA-v2-7B
PPL = 6.63 for LLaMA-v2-13B
* iq1_m: go to 3-bit scales
There is slight increase in PPL, but the 0.0625 bpw reduction
in size is totally worth it.
We now have
PPL(LLaMA-v2-7B ) = 9.4469 at 1.96 bpw
PPL(LLaMA-v2-13B) = 6.8717 at 1.93 bpw
PPL(LLaMA-v2-70B) = 4.8568 at 1.85 bpw
* iq1_m: scalar dot product
* iq1_m: AVX2 dot product
* iq1_m: very slightly faster AVX2 dot product
* iq1_m: ARM_NEON dot product
Works, but very slow (10.5 t/s)
* iq1_m: Metal - dequantize works, dot product does not
* iq1_m: Metal now works
About the same performance as iq1_s.
* iq1_m: minor
* iq1_m: checking pure iq1_m quantization
It is pretty bad: PPL(LLaMA-v2-7B) = 34 if we quantize output.weight
with Q4_K.
* iiq1_m: slightly faster ARM_NEON dot product
10.5 t/s -> 11.65 t/s
* iq1_m: faster ARM_NEON dot product
11.65 t/s -> 14.9 t/s
* iq1_m: another minor ARM_NEON dot product improvement
14.9 -> 15.0 t/s
* iq1_m: small PPL improvement via super-block scale adjustment
After quantizing block scales redo the super-block scale fit.
PPL(LLaMA-v2-7B ) = 9.3346
PPL(LLaMA-v2-13B) = 6.8419
PPL(LLaMA-v2-70B) = 4.8294
PPL(Mistral-7B ) = 8.1624
* iq1_m: adapt to CUDA refactoring
* iq1_m: remove unused variable
We have progressed to warnings being errors.
* iq1_m: add to backend-ops tests
* iq1_m: fix Windows ARM
* iq1_m: use common definition of iq1m_scale_t
* cuda: assert -> NO_DEVICE_CODE
* iq1_M: PR comments
---------
Co-authored-by: Iwan Kawrakow <iwan.kawrakow@gmail.com>
