* SimpleChat: A placeholder system prompt, Use usage msg in code
Just have a alert msg wrt needing javascript enabled in html. And
have usage message from js file. Update the usage message a bit.
So also enable switch session wrt setup_ui call.
Add a possible system prompt as a placeholder for the system-input.
* SimpleChat:CompletionMode: Allow control of Role: prefix
* SimpleChat:Completion: Avoid Role: prefix; Newline only in between
In completion mode
* avoid inserting Role: prefix before each role's message
* avoid inserting newline at the begin and end of the prompt
message. However if there are multiple role messages, then
insert newline when going from one role's message to the
next role's message.
* SimpleChat:CompletionMode: Update readme/usage, trim textarea newline
Readme update wrt completion mode behavior.
Usage help updated wrt completion mode behavior.
When changing from input to textarea elment wrt user input, the last
newline at the end of the user input wrt textarea, was forgotten to be
filtered, this is fixed now. However if user wants to have a explicit
newline they can using shift+enter to insert a newline, that wont be
removed. The extra newline removal logic uses substring and keyup to
keep things simple and avoid some previously noted bugs wrt other
events in the key path as well as IME composition etal.
* SimpleChat:SC: Ensure proper clearing/reseting
previous logic would have cleared/reset the xchat, without doing
the same wrt iLastSys, thus leading to it pointing to a now non
existent role-content entry.
So if a user set a system prompt and used completion mode, it would
have done the half stupid clear, after the model response was got.
Inturn when user tries to send a new completion query, it would
inturn lead to handle_user_submit trying to add/update system prompt
if any, which will fail, bcas iLastSys will be still pointing to a
non existant entry.
This is fixed now, by having a proper clear helper wrt SC class.
* SimpleChat: Update usage note and readme a bit
* SimpleChat:Completion: clear any prev chat history at begining
Previously any chat history including model response to a completion
query would have got cleared, after showing the same to the user,
at the end of handle_user_submit, rather than at the begining.
This gave the flexibility that user could switch from chat mode
to completion mode and have the chat history till then sent to
the ai model, as part of the completion query. However this flow
also had the issue that, if user switches between different chat
sessions, after getting a completion response, they can no longer
see the completion query and its response that they had just got.
The new flow changes the clearing of chat history wrt completion
mode to the begining of handle_user_submit, so that user doesnt
lose the last completion mode query and response, till a new
completion mode query is sent to the model, even if they were to
switch between the chat sessions. At the same time the loss of
flexibility wrt converting previous chat history into being part
of the completion query implicitly doesnt matter, because now
the end user can enter multiline queries.
* SimpleChat:Try read json early, if available
For later
the server flow doesnt seem to be sending back data early, atleast
for the request (inc options) that is currently sent.
if able to read json data early on in future, as and when ai model
is generating data, then this helper needs to indirectly update
the chat div with the recieved data, without waiting for the
overall data to be available.
* SimpleChat: Rename the half asleep mis-spelled global var
* SimpleChat: Common chat request options from a global object
* SimpleChat: Update title, usage and readme a bit
Keep the title simple so that print file name doesnt have chars
that need to be removed.
Update readme wrt some of the new helpers and options.
Change Usage list to a list of lists, add few items and style it
to reduce the margin wrt lists.
* SimpleChat:ChatRequestOptions: max_tokens
As some times based on the query from the user, the ai model may get
into a run away kind of generation with repeatations etal, so adding
max_tokens to try and limit this run away behaviour, if possible.
* SimpleChat: Reduce max_tokens to be small but still sufficient
* SimpleChat: Consolidate global vars into gMe, Display to user
This allows the end user to see the settings used by the logic,
as well as allows users to change/update the settings if they
want to by using devel-tools/console
* SimpleChat:SlidingWindow: iRecentUserMsgCnt to limit context load
This is disabled by default. However if enabled, then in addition
to latest system message, only the last N user messages, after the
latest system message and its reponses from the ai model will be sent
to the ai-model, when querying for a new response.
This specified N also includes the latest user query.
* SimpleChat: placeholder based usage hint for user-in textarea
* SimpleChat: Try make user experience better, if possible
Reduce chat history context sent to the server/ai-model to be
just the system-prompt, prev-user-request-and-ai-response and
cur-user-request, instead of the previous full chat history.
This way if there is any response with garbage/repeatation, it
doesnt mess with things beyond the next question, in some ways.
Increase max_tokens to 1024, so that a relatively large previous
reponse doesnt eat up the space available wrt next query-response.
However dont forget that the server when started should also
be started with a model context size of 1k or more, to be on
safe side.
Add frequency and presence penalty fields set to 1.2 to the set
of fields sent to server along with the user query. So that
the model is partly set to try avoid repeating text in its
response.
* SimpleChat:Add n_predict (equiv max_tokens) for llamacpp server
The /completions endpoint of examples/server doesnt take max_tokens,
instead it takes the internal n_predict, for now add the same on
the client side, maybe later add max_tokens to /completions endpoint
handling.
* SimpleChat: Note about trying to keep things simple yet flexible
* SimpleChat: Add a skeletal html page
Contains a div placeholder for showing chat messages till now
a text-input for allowing user to enter next chat message/query
to the model.
a submit button to allow sending of the user entered message and
chat till now to the model.
* SimpleChat: A js skeleton with SimpleChat class
Allows maintaining an array of chat message.
Allows adding chat message (from any of the roles be it system,
user, assistant, ...)
Allows showing chat messages till now, in a given div element.
* SimpleChat: request_json, globals, startme
* SimpleChatJS: Roles Class, submitClick
Define Role class with static members corresponding to the roles.
Update startme to
* Get hold of the ui elements.
* Attach a click handler to submit button, which adds the user input
to xchats array and shows the chat messages till now in chat div
element.
Trap DOMContentLoaded to trigger startme
* SimpleChat:HTML: Bring in the js file
* SimpleChat: Rather value wrt input text element
* SimpleChat: Also add completions related prompt
* SimpleChat: Use common helper logic wrt json data
* SimpleChat: Move handling of submit request into its own func
* SimpleChat: Try handshake with llm over its web service endpoint
* SimpleChat:JS: Extract model response and show to user
* SimpleChat:JS: Messages/Prompt, indicate working to end user
* SimpleChat: Try keep input element in view
* SimpleChat: Diff user/assistant msgs, Make input wider
Also show a default message to user
Also add some metas
* SimpleChat: Move into its own sub directory to avoid confusion
* SimpleChat:sh: Add simple shell script to run python3 http.server
So one needs to run the llm server locally
then run this script and access it using a local browser
* SimpleChat:JS: Try trap enter key press wrt input text field
So user can either press submit button or press enter key
* SimpleChat: Allow user to select chat or completion mode
* SimpleChat: Dont submit if already submitted and waiting
Also make chat the default selection wrt mode
* SimpleChat:JS: Handle difference in response
Try read the assistance response from appropriate field in the
response got.
Also examples/server seems to return the response in a slightly
different field, so try account for that also.
* SimpleChat:JS: Force completion mode be single message by default
* SimpleChat: Add a simple readme file
* SimpleChat:HTML: Cleanup/structure UI a bit, Add input for system
* SimpleChat:Allow system prompt to be set, if provided before user
* SimpleChat: Ignore empty user input, without trimming
* SimpleChat:Alert user if they provide sysprompt late or change it
* SimpleChat: Move handling systemprompt into its own func
* SimpleChat:HTML: Add a style for system role message
* SimpleChat: Update the readme file
* SimpleChat:CSS: Move style info into its own css file
To keep it simple, clean and seperate so that things are not
unnecessarily cluttered.
* SimpleChat:CSS: Allow for chat div to be scrollable
* SimpleChat:JS: Try ensure the last entry in chat is visible
Needed because now only the chat div is scrollable and not the full
page.
In last commit the chat div size was fixed to 75% vertical height,
so the full page no longer scrolls, so the old bring user-input
element to view wont work, instead now the last element in the
chat div should be brought into view.
* SimpleChat:JS: bottom of element visible, Set focus to user input
As the generated text could be multiple lines and occupy more space
that the full scrollable div's vertical space, make the bottom of
the last element (which can be such a generated text) in the div
visible by scrolling.
Ensure that the user input box has focus
* SimpleChat: Update notes a bit. Try keep browser happy
Avoid browser quirk mode with DOCTYPE.
Help with accessibility a bit by specifying the language explicitly.
Specify the char encoding explicitly, inturn utf-8 is a safe bet,
even with intermixing of languages if reqd in future.
Add a cache-control http-equiv meta tag, which in all probability
will be ignored.
Defer js loading and execution, just for fun and future, not that
critical here as it stands now.
* SimpleChat:HTML:Group user input+btn together; Note about multichat
* SimpleChat:JS: Allow for changing system prompt anytime for future
* SimpleChat:Readme: Note about handle_systemprompt begin/anytime
* SimpleChat:HTML: Add viewport meta for better mobile friendliness
Without this the page content may look too small.
* SimpleChat:HtmlCss: Cleanup UI flow
set margin wrt vmin rather than vw or vh so portrait/landscape ok.
Use flex and flex-grow to put things on the same line as well as
distribute available space as needed. Given two main elements/line
so it remains simple.
In each line have one element with grows and one sits with a basic
comfortably fixed size.
* SimpleChat: textarea for multiline user chat, inturn shift+enter 4 enter
* SimpleChat: Make vertical layout better responsive (flex based)
Also needed to make things cleaner and properly usable whether
landscape or portrait, after changing to multiline textarea rather
than single line user input.
Avoid hardcoding the chat-till-now display area height, instead
make it a flex-growable within a flex column of ui elements within
a fixed vertical area.
* SimpleChat: Rename simplechat.html to index.html, update readme
Instead of providing a seperate shell script, update the readme wrt
how to run/use this web front end.
* SimpleChat: Screen fixed view and scrolling, Printing full
* SimpleChat:JS:CI: Avoid space at end of jsdoc param line
* SimpleChat:JS: MultiChat initial skeleton
Will help maintain multiple independent chats in future
* SimpleChat:JS: Move system prompt begin/anytime into SimpleChat
* SimpleChat:JS:Keep MultiChatUI simple for now
Worry about different chats with different servers for later.
* SimpleChat:JS: Move handle submit into MultiChat, build on same
Create an instance of MultiChatUI and inturn a instance of chat
session, which is what the UI will inturn work on.
* SimpleChat:JS: Move to dictionary of SimpleChat, instead of array
* SimpleChat: Move ui elements into MultiChatUI, Update el IDs
Move ui elements into MultiChatUI, so that current handleUserSubmit
doesnt need to take the element arguments. Also in future, when
user is allowed to switch between different chat sessions, the
UI can be updated as needed by using the elements in UI already
known to MultiChatUI instance.
Rename the element ids' so that they follow a common convention,
as well as one can identify what the element represents in a more
consistant manner.
* SimpleChat:MCUI:Show available chat sessions, try switch btw them
Previous commits brought in / consolidated existing logic into
MultiChatUI class.
Now start adding logic towards multichat support
* show buttons indicating available chat sessions
* on sessin button click, try switch to that session
* SimpleChat:MCUI: Store and use current chat session id
Also
allow to switch chat session optionally, wrt some of the related
helpers.
setup for two chat sessions by default.
* SimpleChat:MCUI: Delay enabling user-input to avoid race
Re-enable user-input, only after response to a user query has been
updated to the chat-div. This ensures that if user tries to switch
chat session, it wont be allowed till chat-request-response flow is
done.
* SimpleChat: Take care of system prompt
Helper to get the latest system prompt and inturn use same to
set the system prompt ui, when switching.
Ensure that system prompt is set if and when enter key is pressed.
* SimpleChat:GetSystemLatest, fix a oversight.
* SimpleChat:MCUI: Allow selected chat-session btn to be highlighted
Also have a general helper for setting class of children.
* SimpleChat:Cleanup corners
Show system prompt in chat space, when it is set by pressing enter,
as a feedback to user.
Alert user, if they try to switch chat session in the middle of
waiting for a response from the ai model.
* SimpleChat:MCUI: Ensure req-resp failure doesnt lock up things
* SimpleChat:MCUI: Support for new chat sessions
Also a general create button helper.
* SimpleChat:MCUI: CreateSessionBtn helper, use wrt NewChat
Also fix a oversight wrt using stale data wrt the list of chat
sessions.
* SimpleChat:MCUI: NewChat btn first before existing chat sessions
* SimpleChat:MCUI:CornerCases:Skip new chat, show only if current
Skip NewChat if user cancels or if one waiting for response from
the ai model.
Dont show a chat with newly got ai model response, if current chat
session has changed, some how. Chat session shouldnt be allowed to
change, if there is a pending response, but still as a additional
sanity check.
* SimpleChat: Update readme, title, show usage if no chat to show
* SimpleChat: Cleanup the log/dialog messages a bit
* Update brute force test: add_special
* Update brute force test: default values for add_bos_token and add_eos_token
* Enable rtrim when pre-inserting BOS
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Revert "server : fix test regexes"
* Update brute force test: special tokens
* Fix added tokens
- Try to read 'added_tokens.json'.
- Try to read 'tokenizer_config.json'.
- Try to read 'tokenizer.json'.
* Fix special tokens rtrim
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* server : fix test regexes
- Change '--embedding' to '--embeddings' in the README
- Update the description to match the latest --help output
- Added a caution about defining physical batch size
* [server] Cleanup a memory leak on exit
There are a couple memory leaks on exit of the server. This hides others.
After cleaning this up, you can see leaks on slots. But that is another
patch to be sent after this.
* make tab into spaces
* convert-hf : begin refactoring write_tensor
* convert : upgrade to sentencepiece v0.2.0
* convert-hf : remove unused n_dims in extra_*_tensors
* convert-hf : simplify MoE weights stacking
* convert-hf : flake8 linter doesn't like semicolons
* convert-hf : allow unusual model part names
For example, loading `model-00001-of-00001.safetensors` now works.
* convert-hf : fix stacking MoE expert tensors
`torch.stack` and `torch.cat` don't do the same thing.
* convert-hf : fix Mamba conversion
Tested to work even with a SentencePiece-based tokenizer.
* convert : use a string for the SentencePiece tokenizer path
* convert-hf : display tensor shape
* convert-hf : convert norms to f32 by default
* convert-hf : sort model part names
`os.listdir` is said to list files in arbitrary order.
Sorting the file names should let "model-00009-of-00042.safetensors"
be loaded before "model-00010-of-00042.safetensors".
* convert-hf : use an ABC for Model again
It seems Protocol can't be used as a statically type-checked ABC,
because its subclasses also can't be instantiated. (why did it seem to work?)
At least there's still a way to throw an error when forgetting to define
the `model_arch` property of any registered Model subclasses.
* convert-hf : use a plain class for Model, and forbid direct instantiation
There are no abstract methods used anyway,
so using ABC isn't really necessary.
* convert-hf : more consistent formatting of cmdline args
* convert-hf : align the message logged for converted tensors
* convert-hf : fix Refact conversion
* convert-hf : save memory with lazy evaluation
* convert-hf : flake8 doesn't like lowercase L as a variable name
* convert-hf : remove einops requirement for InternLM2
* convert-hf : faster model parts loading
Instead of pre-loading them all into a dict, iterate on the tensors
in the model parts progressively as needed in Model.write_tensors
Conversion for some architectures relies on checking for the presence
of specific tensor names, so for multi-part models, the weight map is read
from the relevant json file to quickly get these names up-front.
* convert-hf : minor changes for consistency
* gguf-py : add tqdm as a dependency
It's small, and used for a progress bar
in GGUFWriter.write_tensors_to_file
* Added themes support with two sample themes and a favicon.
* Newline
* Newline
* Newline
* Trailing whitespace
* Increased opacity for contrast
* Increase opacity.
Check actions cancelled for some other priority job and I can't seem to manually re-run them, so MOAR OPACITY
* Opacity action trigger.
Trying to re-trigger the cancelled action.
* One more opacity adjustment
This Actions pipeline is failing for random issues.
* Delete examples/server/themes/buttons_top/completion.js
This will be served from the static string built-in to server.
* Delete examples/server/themes/buttons_top/index.js
This will be served from the static string built-in to server.
* Delete examples/server/themes/wild/completion.js
This will be served from the static string built-in to server.
* Delete examples/server/themes/buttons_top/json-schema-to-grammar.mjs
This will be served from the static string built-in to server.
* Delete examples/server/themes/wild/index.js
This will be served from the static string built-in to server.
* Delete examples/server/themes/wild/json-schema-to-grammar.mjs
This will be served from the static string built-in to server.
* Replaced underscore.
This will reproduce the issue in llama13b
{
'prompt': 'Q: hello world \nA: ',
'stop': ['\n'],
'temperature': 0.0,
'n_predict': 10,
'cache_prompt': True,
'n_probs': 10
}
* ggml : add ggml_flash_attn_ext API
* ggml : fix GQA support in ggml_flash_attn_ext
* ggml : online attention (CPU)
* metal : initial implementation
* metal : f16 precision
* metal : reduce branches
* metal : specialize for head size
* wip : 8 rows per simd group
* wip : 4 rows per simd group
* wip : template for rows per warp
* metal : parallelize across KV size
* metal : parallel reduce across heads
* metal : efficient flash_attn_f16 implementation
* metal : avoid redundant loads of the attention
* metal : scale and mask in matrix form
* metal : fix comment
* llama : avoid ggml_cast, use F32 query
* metal : add parallel reduce version (disabled)
* metal : move output into local memory + optimize
- the result from each simdgroup now stays in the registers
- significantly reduced SRAM usage
- more efficient skipping of -INF blocks
- avoid simdgroup barrier in hot loop
- add comments
* metal : add tests, fix scaling, support C > 32
* metal : improve precision
* ggml : fix f16 mad
* metal : minor
* metal : support Q > 8
* tests : add ATTN tests
* metal : disable buffer allocation logs
* tests : more
* metal : faster inner loop for C == 32
* metal : fix array initialization
* tests : ifdef
* ggml : switch to padded F16 mask for ggml_soft_max, ggml_flash_attn_ext
* ggml : fix ggml_soft_max mask requirement
* cuda : fix soft_max to use correct mask size
* cuda : add flash_attn kernel (wip)
* metal : optimize softmax for C > 32
* metal : optimize softmax
* tests : minor fix
* cuda : avoid zeroing fragments
* tests : update dims
* cuda : fix __hisinf() result check
* cuda : avoid warp_reduce for smax
* cuda : use int instead of int64_t
Noticeably improves performance (thanks to Johannes)
* cuda : make loops use the same loop values
Thanks Johannes again for the tip
* cuda : unroll some of the loops
* cuda : avoid __hisinf branches
* cuda : use half2 in softmax
* cuda : switch to 1 warp for bs > 16
* cuda : speed-up reduce part of the kernel
* cuda : unroll Q*K^T loop
* cuda : fix -INF block check
* cuda : simplify softmax
* cuda : fix matrix names
* cuda : minor
* llama : adapt to F16 KQ_pos
* llama : adapt new models to F16 KQ_mask
* ggml : fix F16 store (ARM NEON)
* llama : fix type of KQ_mask and KQ_pos
* ggml : fix CPU soft_max
* tests : add hs=256
* cuda : fix build
* metal : improve perf via smaller int registers
* cuda : adapt soft_max to F16 mask and pos
* CUDA: faster FlashAttention, kernel for bs == 1
* 16 cols for Phi-2
* no vec for hs, no hs==256 ncols==32 for Volta
* adjust kernel selection logic
* 4 warps, 256 stride for all D
* no ncols == 64
* Multiple parallel blocks for batch size 1
* fix compile warnings
* fix excessive KQ_b loads
* fix cmake build
* fix KV cache padding, NaN from INFINITY (#6438)
* llama : flash_attn cparam + fix defrag
* server: support flash_attn param
* server: bench: enable flash_attn param
* CUDA: refactor host code, dyn. par. blocks
* fix flash_attn_vec_f16 race condition
* flush softmax exp below threshold to 0
* store temp KQ in registers
* Calculate KQ as FP32 if KQV has GGML_PREC_F32
* Add __hgt2_mask implementation for CUDA 11
* fix KQ FP32 precision fpr parallel_blocks > 1
* llama-bench : add -fa,--flash-attn arg
* metal : add BS=1 kernel for flash attention (#6508)
* metal : add BS=1 kernel for flash attention (wip)
* metal : support more than 1 warps
* metal : opts
* metal : opt
* metal : switch to parallel reduce
* metal : reduce registers
* metal : simplify
* metal : initial FA vec kernel
* metal : use F32 attention accumulators
* batched-bench : add fattn arg
* llama : simplify llama_build_kv_store
ggml-ci
* llama : adapt build_olmo to changes
* ggml : fix arm fp16 store on windows
* metal : clean-up
* metal : clean-up kernel code
* metal : minor
* tests : remove benchmarks
ggml-ci
* ggml : fix avx512 const correctness
ggml-ci
* ggml : fix soft_max with bias on CPU
ggml-ci
* common : print --flash-attn in help
* ggml : fix num dimensions in ggml_flash_attn_ext
* llama : force disable flash attention for incompatible models
* ggml : ggml_soft_max support F16/F32 mask/pos
ggml-ci
* cuda : uint -> uint32_t
* cuda : "constexpr dim3" -> "const dim3"
ggml-ci
* cuda : try to fix __hgt2_mask
ggml-ci
* ggml : add TODO's for F16/F32 mask/pos support in other backends
* llama : replace bool need_kq_pos with use_alibi
* llama : prep ALiBi support for BERT models
ggml-ci
* llama : fix n_batch requirements
ggml-ci
* cont
* server : add help for --flash-attn arg
* llama : disable FA for AMD
* tests : remove TMP_ATTN_BENCH
ggml-ci
* llama : support save/load state with FA enabled
ggml-ci
* ci : add CUDA save-load-state tests
ggml-ci
* llama : llama_kv_cache_clear zeroes data + fix save-load seq
ggml-ci
* llama : fix copy-paste errors, add TODO
* llama : disallow incompatible states
* llama : update llama_state_get_size after v_trans field
* metal : remove tmp log
* llama : add static reminder for llama_state_get_size
* metal : fix max nsg
ggml-ci
* ci : fix arg order
ggml-ci
---------
Co-authored-by: Johannes Gäßler <johannesg@5d6.de>
Co-authored-by: Pierrick HYMBERT <pierrick.hymbert@gmail.com>
* imatrix: save the dataset file used in the output file
* llama: support kv overrides type string string
* common: factorize KV Overrides parsing between common and server
* quantize: add imatrix n entries and dataset KV metadata
quantize: factorize KV Overrides parsing between common
#6656
* llama: remove kv override str_value initialization as it does not compile on some toolchain
* quantize: add imatrix m_last_call as `quantize.imatrix.chunks_count`
* quantize: add imatrix filename in KV
* llama: add llama_model_kv_override_free
* common: add llama_model_kv_override_free
common: free kv override if used after model loading
* llama: finally move the string KV override value to the stack
* llama : minor
* no need to add a NUL to the std::vector, std::string can be initialized from a pair of iterators.
Co-authored-by: slaren <slarengh@gmail.com>
* kv override: ensure string termination
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
Co-authored-by: slaren <slarengh@gmail.com>
* server: cap n_predict if not set to n_ctx_train
* server: fix infinite loop
* server: infinite loop, move in process_token
server: infinite loop: set stop limit to true
* minor: spaces
* minor: spaces
* server: include prompt tokens in the EOS limit
* fix: revert showing control tokens by default
* feat: revert changes to default behavior of llama_token_to_piece; provide overridden declaration to receive "bool special" param to toggle showing control tokens
* feat: use the overridden declaration of llama_token_to_piece from common/common.cpp to specify "false" so that control tokens are not shown in chat completion responses"
* common : simplify
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* `build`: generate hex dumps of server assets on the fly
* build: workaround lack of -n on gnu xxd
* build: don't use xxd in cmake
* build: don't call xxd from build.zig
* build: more idiomatic hexing
* build: don't use xxd in Makefile (od hackery instead)
* build: avoid exceeding max cmd line limit in makefile hex dump
* build: hex dump assets at cmake build time (not config time)
* Support Llama 3 conversion
The tokenizer is BPE.
* style
* Accept suggestion
Co-authored-by: Sourab Mangrulkar <13534540+pacman100@users.noreply.github.com>
* llama : add llama_token_is_eog()
ggml-ci
* llama : auto-detect more EOT tokens when missing in KV data
* convert : replacing EOS token is a hack
* llama : fix codegemma EOT token + add TODOs
* llama : fix model type string for 8B model
---------
Co-authored-by: Sourab Mangrulkar <13534540+pacman100@users.noreply.github.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
Key changes:
* BERT conversion: fix abuse of LlamaHfVocab, do not set BOS or EOS
* Nomic Embed conversion: pad vocab instead of slicing embedding tensor
* llama_tokenize: handle added special tokens like HF does
* llama : save and restore kv cache for single seq id
* remove trailing whitespace
* respond error in case there's no space in the kv cache
* add kv seq save restore to test case
* add --slot-save-path arg to enable save restore and restrict save location
* Returning 0 for some cases, instead of asserting.
* cleanup error cases
* rename sequence state functions
* rename state get set functions
* add previous function names back in with DEPRECATED notice
* update doc
* adjust endpoints to preferred style
* fix restoring zero cell count
* handle seq rm return value
* unused param
* keep in the size check
* fix return types
* add server test case for slot save restore
* cleanup
* add cake
* cleanup style
* add special
* removing a whole sequence never fails
* move sequence state file functionality from server to llama to match session api and add version tags
* catch exceptions on save as well
* error log messages
* check types for stricter restore
* update server doc
* readme : update API changes date
* strict filename validation
* move include, reject bom as well
* also reject empty filename
* reject whitespace and trailing dot
---------
Co-authored-by: Martin Evans <martindevans@gmail.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* ci: bench: support sse and fix prompt processing time
server: add tokens usage in stream mode
* ci: bench: README.md EOL
* ci: bench: remove total pp and tg as it is not accurate
* ci: bench: fix case when there is no token generated
* ci: bench: change to the 95 percentile for pp and tg as it is closer to what the server exports in metrics
* ci: bench: fix finish reason rate
* ci: bench: change trigger path to not spawn on each PR
* ci: bench: add more file type for phi-2: q8_0 and f16.
- do not show the comment by default
* ci: bench: add seed parameter in k6 script
* ci: bench: artefact name perf job
* Add iteration in the commit status, reduce again the autocomment
* ci: bench: add per slot metric in the commit status
* Fix trailing spaces
* Typo fix to server's README.md
Fix minor typo ("tonen") in server README.
* server readme grammar/style fixes.
Quickly went through this file to look for inconsistencies in
presentation of defaults, flag options, and looked for typos
and grammar issues.
Not perfect, but hopefully improved.
* Update README.md
Remove an extra space before newline.
* llama : greatly reduce logits memory usage
* llama : more compact state saving and reloading
* llama : fix lctx.n_outputs not being set before building graph
* perplexity : adapt to the logits API changes
* perplexity : fix Winogrande, use correct logits for second choice start
The first logits used to evaluate the second choice were not from
the end of the common prefix; instead, they were the logits from the end
of the first choice. This has been corrected.
The previous implementation sometimes had outliers in the scores of
choices for some tasks, and the logic to skip choices words
in the log-likelihood evaluation probably was an attempt to reduce those,
but it was complex and didn't quite seem to be the right thing.
This is simpler now, and the outlier scores aren't there anymore.
* perplexity : normalize spaces and punctuation in Winogrande sentences
* llama : fix embedding conditions
* llama : fix llama_get_embeddings_ith when the resulting id is 0
* llama : fix wrong n_outputs in llama_set_inputs
A mismatch happened when using a smaller n_ubatch than n_batch and then using
llama_batch_get_one(). The decision of what n_outputs should be now almost
fully depends on how lctx.n_outputs is set in llama_decode_internal.
The conditions are simpler this way.
* llama : when saving the state, recalculate n_outputs
This ensures the correct number of outputs for the entire previous batch
is stored in the session file, even when n_ubatch is smaller than n_batch.
* llama : fix not-skipping outputs of non-causal models
* llama : fix running a batch with n_outputs == 0
It previously worked because lctx.inp_out_ids was not initialized,
so it pointed to some garbage address which was somehow still valid when I
ran my tests.
* llama : keep same graph topology even when n_outputs == 0
* ggml : saner ggml_can_repeat with empty tensors
* ggml : future-proof ggml_is_empty by using GGML_MAX_DIMS - 1
* ggml : do not multi-thread ops returning empty tensors
* ggml : make ggml_is_empty public and work with views
* llama : use a vector for ctx->output_ids
* llama : rework reallocation logic for llama_output_reserve
Now comparing the actual size with the new total size of the output buffer
to allow more efficient enabling and disabling of the embeddings
and/or logits output in the future.
* ggml : skip empty tensors in all backends
* llama : fix llama_output_reserve nullptr deref when new_size is 0
* perplexity : make Winogrande work as it does on master
The problems with the Winogrande implementation will
need to be fixed in a separate PR to ease review.
* llama : clearer error messages for invalid logits or embeddings ids
* llama : assert all models that can have inp_out_ids
Since the graph topology is now constant, this presence check
can be done even when there are no outputs.
* llama : assert logits and embd buffers exist before writing to them
* llama : handle errors from llama_output_reserve at call sites
* perplexity : make hellaswag and multiple-choice outputs identical to master
Due to how the KV cache is updated, the logprobs for tokens in a batch
are very slightly affected by the other tokens present in the batch,
so to make hellaswag and multiple-choice return exactly the same results
as on master, the last token of each sequence needs to be evaluated
even though its output is not used at all.
This will probably be changed back in the future to make these benchmarks
a tiny bit faster.
* perplexity : fix division by zero when using less than 100 multiple-choice tasks
* llama : allow loading state saved with a different ctx size
When loading a session file, the context size is now only required to be
at least enough to load the KV cells contained in that session file,
instead of requiring to use exactly the same context size as when saving.
Doing this enables the use-case of extending or shrinking the context size
of a saved session.
This breaks existing session files because the meaning of kv_buf_size
is slightly changed (previously it was the size of the whole KV cache,
now it's only the size of the saved part of it). This allows for
finer-grained sanity checks when loading in an effort to keep kv_buf_size
useful even when the kv_size is changed.
* llama : minor
ggml-ci
* readme : update recent API changes, and warn about Vulkan
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* llama: llama_split_prefix fix strncpy does not include string termination
common: llama_load_model_from_url:
- fix header name case sensitive
- support downloading additional split in parallel
- hide password in url
* common: EOL EOF
* common: remove redundant LLAMA_CURL_MAX_PATH_LENGTH definition
* common: change max url max length
* common: minor comment
* server: support HF URL options
* llama: llama_model_loader fix log
* common: use a constant for max url length
* common: clean up curl if file cannot be loaded in gguf
* server: tests: add split tests, and HF options params
* common: move llama_download_hide_password_in_url inside llama_download_file as a lambda
* server: tests: enable back Release test on PR
* spacing
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* spacing
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* spacing
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* server tests : remove seemingly redundant newlines in print()
* server tests : use built-in subprocess features, not os.kill and psutil
* server tests : do not catch e.g. SystemExit; use print_exc
* server tests: handle TimeoutExpired exception
* server tests: fix connect on dual-stack systems
* server: tests: add new tokens regex on windows generated following new repeat penalties default changed in (#6127)
* server: tests: remove the hack on windows since now we get the good socket family
* server: tests: add new tokens regex following new repeat penalties default changed in (#6127)
* server: tests: add new tokens regex following new repeat penalties default changed in (#6127)
---------
Co-authored-by: Pierrick HYMBERT <pierrick.hymbert@gmail.com>
* llama : add pipeline parallelism support for batch processing with multiple CUDA GPUs
ggml-ci
* server : add -ub, --ubatch-size parameter
* fix server embedding test
* llama : fix Mamba inference for pipeline parallelism
Tested to work correctly with both `main` and `parallel` examples.
* llama : limit max batch size to n_batch
* add LLAMA_SCHED_MAX_COPIES to configure the number of input copies for pipeline parallelism
default increase to 4 (from 2)
changing this value may improve performance for some systems, but increases memory usage
* fix hip build
* fix sycl build (disable cpy_tensor_async)
* fix hip build
* llama : limit n_batch and n_ubatch to n_ctx during context creation
* llama : fix norm backend
* batched-bench : sync after decode
* swiftui : sync after decode
* ggml : allow ggml_get_rows to use multiple threads if they are available
* check n_ubatch >= n_tokens with non-casual attention
* llama : do not limit n_batch to n_ctx with non-casual attn
* server : construct batch with size of llama_n_batch
* ggml_backend_cpu_graph_compute : fix return value when alloc fails
* llama : better n_batch and n_ubatch comment
* fix merge
* small fix
* reduce default n_batch to 2048
---------
Co-authored-by: Francis Couture-Harpin <git@compilade.net>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* server: format error to json
* server: do not crash on grammar error
* fix api key test case
* revert limit max n_predict
* small fix
* correct coding style
* update completion.js
* launch_slot_with_task
* update docs
* update_slots
* update webui
* update readme
* server: ci: windows build and tests
* server: ci: remove tmp push branch
* server: ci: EOF EOL
* Use builti
Co-authored-by: Jared Van Bortel <cebtenzzre@gmail.com>
* server: tests: server graceful shutdown, then kill, then hard kill
* server: tests: remove python2 unicode string
* server: tests: remove wrong comment on server starting, close_fds is always true
* server: tests: server kill, if pid exists
* server: tests: remove dependency to killall
* server: tests: ci windows: pid exists better handling
---------
Co-authored-by: Jared Van Bortel <cebtenzzre@gmail.com>
* server: bench: Init a bench scenario with K6
See #5827
* server: bench: EOL EOF
* server: bench: PR feedback and improved k6 script configuration
* server: bench: remove llamacpp_completions_tokens_seconds as it include prompt processing time and it's misleading
server: bench: add max_tokens from SERVER_BENCH_MAX_TOKENS
server: bench: increase truncated rate to 80% before failing
* server: bench: fix doc
* server: bench: change gauge custom metrics to trend
* server: bench: change gauge custom metrics to trend
server: bench: add trend custom metrics for total tokens per second average
* server: bench: doc add an option to debug http request
* server: bench: filter dataset too short and too long sequences
* server: bench: allow to filter out conversation in the dataset based on env variable
* server: bench: fix assistant message sent instead of user message
* server: bench: fix assistant message sent instead of user message
* server : add defrag thold parameter
* server: bench: select prompts based on the current iteration id not randomly to make the bench more reproducible
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* add cmake build toggle to enable ssl support in server
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* add flags for ssl key/cert files and use SSLServer if set
All SSL setup is hidden behind CPPHTTPLIB_OPENSSL_SUPPORT in the same
way that the base httlib hides the SSL support
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* Update readme for SSL support in server
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* Add LLAMA_SERVER_SSL variable setup to top-level Makefile
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
---------
Signed-off-by: Gabe Goodhart <ghart@us.ibm.com>
* mamba : begin working on support for Mamba SSM
* mamba : begin figuring out how to (ab)use the kv cache for Mamba
* mamba : recurrent inference almost works, but incoherent
* mamba : recurrent inference WORKS!!!
* convert : optionally use d_conv and d_state from config.json for Mamba
* mamba : refactor recurrent conv, resulting in 20% perf increase
It's still slower than I'd like, but I did not really optimize `ggml_exp` yet.
I also refactored `ggml_exp` to work with tensors with more than 2 dimensions.
* ggml : parallelize ggml_exp
This results in 8% faster token generation for Mamba-130M.
* mamba : simplify the conv step with a self-overlapping view
Turns out the conv_state can be made smaller by one column.
Note that this breaks existing GGUFs of Mamba,
because the key_value_length field is tied to the conv_state size.
Convolution with a self-overlapping view is cool!
And it's much simpler than what I initially thought would be necessary
to make the convolution step work with more than 1 token at a time.
Next step is to make the SSM step work on batches of tokens too,
and thus I need to figure out a way to make a parallel selective scan
which will keep the ssm_state small and won't make it bigger
by a factor of (n_layer * batch_size).
* llama : fix Mamba KV self size wrongly displaying as f16 instead of f32
Relatedly, I also tried to see if other types than f32 worked for the states,
but they don't, because of the operators used.
It's probably better anyway to keep lots of precision there,
since the states are small anyway.
* mamba : fix self-overlapping view depth stride
* mamba : handle batches of more than 1 token
This means running Mamba no longer crashes when using the default settings!
And probably also slightly faster prompt processing.
Both batched and non-batched processing yield the same output.
Previously, the state was not cleared when starting a sequence.
Next step is to make the KV cache API work as expected for Mamba models.
* ggml: add ggml_ssm_scan to help with parallel selective scan
If the selective scan was implemented without a custom operator,
there would be waaay too many nodes in the graph. For example,
for Mamba-130M, with a batch size of 512 (the default),
a naive selective scan could add at least 24*512=12288 nodes,
which is more than LLAMA_MAX_NODES (8192),
and that's only for the smallest Mamba model.
So it's much cleaner with a custom operator.
Not sure about the name, though.
* ggml : in ggml_ssm_scan, merge multiple rows in the same vec operation
This will help with performance on CPU if ggml_vec_mul_f32
and ggml_vec_add_f32 are ever optimized with SIMD.
* mamba : very basic quantization support
Mostly works, but there is currently no difference
between the variants of a k-quant (e.g. Q4_K_S and Q4_K_M are the same).
Most of the SSM-specific weights can be kept in f32 without affecting
the size that much, since they are relatively small.
(the linear projection weights are responsible for most of Mamba's size)
Too much quantization seems to make the state degrade quite fast, and
the model begins to output gibberish.
It seems to affect bigger models to a lesser extent than small models,
but I'm not sure by how much.
Experimentation will be needed to figure out which weights are more important
for the _M (and _L?) variants of k-quants for Mamba.
* convert : fix wrong name for layer norm weight of offical Mamba models
I was using Q-bert/Mamba-* models before, which have a slighlty different
naming scheme for the weights.
(they start with "model.layers" instead of "backbone.layers")
* mamba : fuse more steps of the SSM scan in the ggml_ssm_scan operator
This increases performance on CPU by around 30% for prompt processing,
and by around 20% for text generation.
However, it also makes the ggml_exp and ggml_soft_plus operators unused.
Whether or not they should be kept will be decided later.
* convert : for Mamba, also consider the "MambaLMHeadModel" arch name
It's the name of the class of the official implementation,
though they don't use it (yet) in the "architectures" field of config.json
* mamba : fix vocab size problems with official models
The perplexity was waaaay to high for models with a non-round vocab size.
Not sure why, but it needed to be fixed in the metadata.
Note that this breaks existing GGUF-converted Mamba models,
but **only if** the vocab size was not already rounded.
* ggml : remove ggml_exp and ggml_soft_plus
They did not exist anyway outside of this branch,
and since ggml_ssm_scan fused operations together, they are unused.
It's always possible to bring them back if needed.
* mamba : remove some useless comments
No code change.
* convert : fix flake8 linter errors
* mamba : apply suggestions from code review
* mamba : remove unecessary branch for row-wise ssm_state and C multiplication
It was previously done to avoid permuting when only one token is processed
at a time (like when generating text), but permuting is cheap,
and dynamically changing the compute graph is not future-proof.
* ggml : in ggml_ssm_scan, use more appropriate asserts
* ggml : rename the destination pointer in ggml_compute_forward_ssm_scan_f32
* mamba : multiple sequences, but one at a time
This is a step towards making this Mamba implementation usable
with the server example (the way the system prompt is kept when clearing
the client slots will need to be changed before this can work, though).
The KV cache size for this kind of model is tied to the maximum number
of sequences kept at any single time.
For now, this number is obtained from n_parallel (plus one,
to have an extra sequence to dedicate to the system prompt),
but there might be a better way to do this which won't also
make the main example use 2 cells even if only 1 is really used.
(for this specific case, --parallel 0 helps)
Simultaneous sequence processing will probably require changes to
ggml_ssm_scan, and possibly a new operator for the conv step.
* mamba : support llama_kv_cache_seq_cp
This (mis)uses the logic around K shifts, because tokens in a state
can't be shifted anyway, and because inp_K_shift has the right shape and type.
Using ggml_get_rows is a nice way to do copies, but copy chains can't work.
Fortunately, copy chains don't really seem to be used in the examples.
Each KV cell is dedicated to the sequence ID corresponding to its own index.
* mamba : use a state mask
It's cleaner than the previous heuristic of
checking for the pos of the first token in the batch.
inp_KQ_mask could not be re-used for this, because it has the wrong shape
and because it seems more suited to the next step of
simultaneous sequence processing (helping with the problem of
remembering which token belongs to which sequence(s)/state(s)).
* llama : replace the usage of n_ctx with kv_self.size in many places
* mamba : use n_tokens directly instead of n_tok
* mamba : in comments, properly refer to KV cells instead of slots
* mamba : reduce memory usage of ggml_ssm_scan
From 290.37 MiB to 140.68 MiB of CPU compute buffer size
with Mamba 3B with a batch size of 512.
The result tensor of ggml_ssm_scan was previously a big part
of the CPU compute buffer size. To make it smaller,
it does not contain the intermediate ssm states anymore.
Both y and the last ssm state are combined in the result tensor,
because it seems only a single tensor can be returned by an operator
with the way the graph is built.
* mamba : simultaneous sequence processing
A batch can now contain tokens from multiple sequences.
This is necessary for at least the parallel example, the server example,
and the HellaSwag test in the perplexity example.
However, for this to be useful, uses of llama_kv_cache_seq_rm/cp
will need to be changed to work on whole sequences.
* ggml : add ggml_ssm_conv as a new operator for the conv step of Mamba
This operator makes it possible to use and update the correct states
for each token of the batch in the same way as ggml_ssm_scan.
Other solutions which use existing operators would need loops which would
add too many nodes to the graph (at least the ones I thought of).
Using this operator further reduces the size of the CPU compute buffer
from 140.68 MiB to 103.20 MiB with Mamba 3B with a batch size of 512.
And (at least on CPU), it's a bit faster than before.
Note that "ggml_ssm_conv" is probably not the most appropriate name,
and it could be changed if a better one is found.
* llama : add inp_s_seq as a new input tensor
The most convenient implementation to select the correct state (for Mamba)
for each token is to directly get the correct index from a tensor.
This is why inp_s_seq is storing int32_t and not floats.
The other, less convenient way to select the correct state would be
to have inp_KQ_mask contain 1.0f for each state used by a token
and 0.0f otherwise. This complicates quickly fetching the first used
state of a token, and is also less efficient because a whole row
of the mask would always need to be read for each token.
Using indexes makes it easy to stop searching when there are
no more sequences for a token, and the first sequence assigned
is always very quickly available (it's the first element of each row).
* mamba : support llama_kv_cache_seq_cp copy chains
* mamba : support shifting and dividing the kv cache pos
* mamba : make the server and parallel examples work with whole sequences
A seq_id is dedicated to the system prompt in both cases.
* llama : make llama_kv_cache_seq_rm return whether it succeeded or not
* mamba : dedicate an input tensor for state copy indices
This is cleaner and makes it easier to adapt when/if token positions
(and by extension, inp_K_shift) are no longer integers.
* mamba : adapt perplexity, batched, and batched-bench examples
* perplexity : limit the max number of sequences
This adapts to what the loaded model can provide.
* llama : add llama_n_max_seq to get the upper limit for seq_ids
Used by the perplexity example.
* batched : pass n_parallel to the model's context params
This should have been there already, but it wasn't.
* batched-bench : reserve sequences to support Mamba
* batched-bench : fix tokens being put in wrong sequences
Generation quality isn't what's measured in there anyway,
but at least using the correct sequences avoids using non-consecutive
token positions.
* mamba : stop abusing attention metadata
This breaks existing converted-to-GGUF Mamba models,
but will allow supporting mixed architectures like MambaFormer
without needing to break Mamba models.
This will also allow changing the size of Mamba's states
without having to reconvert models in the future.
(e.g. using something else than d_conv - 1 columns for the conv_states
will not require breaking existing converted Mamba models again)
* gguf-py : add new KV metadata key-value pairs for Mamba
* llama : add new metadata key-value pairs for Mamba
* llama : guard against divisions by zero when n_head is 0
* mamba : rename "unlimited" KV cache property to "recurrent"
* mamba : more correctly update the "used" field of the KV cache
* ggml : in ggml_ssm_scan, use a threshold for soft_plus
This is how the official Mamba implementation does it,
and it's also what torch.nn.Softplus does.
* convert : for Mamba, fallback to internal NeoX tokenizer
The resulting models are exactly the same
as if the tokenizer.json and tokenizer_config.json of GPT-NeoX were there.
* mamba : support state saving and restoring
* ggml : implicitly pass src tensors through dst for Mamba-related ops
* mamba : clarify some comments
* server : fix cache_tokens not getting correctly resized
Otherwise, when the "we have to evaluate at least 1 token" special case
was triggered, an extra token was kept in cache_tokens even if it was
removed from the KV cache.
For Mamba, this caused useless prompt reprocessing when the previous
request triggered the above case.
* convert-hf : support new metadata keys for Mamba
For the models available at
https://huggingface.co/collections/state-spaces/transformers-compatible-mamba-65e7b40ab87e5297e45ae406
* mamba : rename metadata to be more similar to transformers library
This breaks existing converted-to-GGUF models,
but the metadata names are more "standard".
* mamba : support mamba-*-hf models
These models share their token_embd.weight with their output.weight
* mamba : add missing spaces
This is purely a formatting change.
* convert-hf : omit output.weight when identical with token_embd.weight
Only for Mamba for now, but it might be relevant for other models eventually.
Most Mamba models actually share these two tensors, albeit implicitly.
* readme : add Mamba to supported models, and add recent API changes
* mamba : move state_seq and state_mask views outside layer loop
A few tensors were also missing `struct` in front of `ggml_tensor`.
* server : refactoring (wip)
* server : remove llava/clip objects from build
* server : fix empty prompt handling + all slots idle logic
* server : normalize id vars
* server : code style
* server : simplify model chat template validation
* server : code style
* server : minor
* llama : llama_chat_apply_template support null buf
* server : do not process embedding requests when disabled
* server : reorganize structs and enums + naming fixes
* server : merge oai.hpp in utils.hpp
* server : refactor system prompt update at start
* server : disable cached prompts with self-extend
* server : do not process more than n_batch tokens per iter
* server: tests: embeddings use a real embeddings model (#5908)
* server, tests : bump batch to fit 1 embedding prompt
* server: tests: embeddings fix build type Debug is randomly failing (#5911)
* server: tests: embeddings, use different KV Cache size
* server: tests: embeddings, fixed prompt do not exceed n_batch, increase embedding timeout, reduce number of concurrent embeddings
* server: tests: embeddings, no need to wait for server idle as it can timout
* server: refactor: clean up http code (#5912)
* server : avoid n_available var
ggml-ci
* server: refactor: better http codes
* server : simplify json parsing + add comment about t_last
* server : rename server structs
* server : allow to override FQDN in tests
ggml-ci
* server : add comments
---------
Co-authored-by: Pierrick Hymbert <pierrick.hymbert@gmail.com>
* server: tests: add models endpoint scenario
* server: /v1/models add some metadata
* server: tests: add debug field in context before scenario
* server: tests: download model from HF, add batch size
* server: tests: add passkey test
* server: tests: add group attention params
* server: do not truncate prompt tokens if self-extend through group attention is enabled
* server: logs: do not truncate log values
* server: tests - passkey - first good working value of nga
* server: tests: fix server timeout
* server: tests: fix passkey, add doc, fix regex content matching, fix timeout
* server: tests: fix regex content matching
* server: tests: schedule slow tests on master
* server: metrics: fix when no prompt processed
* server: tests: self-extend add llama-2-7B and Mixtral-8x7B-v0.1
* server: tests: increase timeout for completion
* server: tests: keep only the PHI-2 test
* server: tests: passkey add a negative test
* Add "/chat/completions" as alias for "/v1/chat/completions"
* merge to upstream master
* minor : fix trailing whitespace
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* server: docs - refresh and tease a little bit more the http server
* Rephrase README.md server doc
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Update examples/server/README.md
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Update examples/server/README.md
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Update README.md
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
The system prompt is now decoded in batches.
* server : fix off-by-one n_past when start of prompt matches whole cache
The tokens right after the matching part would otherwise skip a pos value.
* server: logs - always use JSON logger, add add thread_id in message, log task_id and slot_id
* server : skip GH copilot requests from logging
* server : change message format of server_log()
* server : no need to repeat log in comment
* server : log style consistency
* server : fix compile warning
* server : fix tests regex patterns on M2 Ultra
* server: logs: PR feedback on log level
* server: logs: allow to choose log format in json or plain text
* server: tests: output server logs in text
* server: logs switch init logs to server logs macro
* server: logs ensure value json value does not raised error
* server: logs reduce level VERBOSE to VERB to max 4 chars
* server: logs lower case as other log messages
* server: logs avoid static in general
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* server: logs PR feedback: change text log format to: LEVEL [function_name] message | additional=data
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* server: monitoring - add /metrics prometheus compatible endpoint
* server: concurrency issue, when 2 task are waiting for results, only one call thread is notified
* server: metrics - move to a dedicated struct
* server: tests: init scenarios
- health and slots endpoints
- completion endpoint
- OAI compatible chat completion requests w/ and without streaming
- completion multi users scenario
- multi users scenario on OAI compatible endpoint with streaming
- multi users with total number of tokens to predict exceeds the KV Cache size
- server wrong usage scenario, like in Infinite loop of "context shift" #3969
- slots shifting
- continuous batching
- embeddings endpoint
- multi users embedding endpoint: Segmentation fault #5655
- OpenAI-compatible embeddings API
- tokenize endpoint
- CORS and api key scenario
* server: CI GitHub workflow
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* server: fallback to chatml
* add new chat template
* server: add AlphaMonarch to test chat template
* server: only check model template if there is no custom tmpl
* remove TODO
* server: health: fix race condition on slots data using tasks queue
* server: health:
* include_slots only if slots_endpoint
* fix compile warning task.target_id not initialized.
* server: enrich health endpoint with available slots, return 503 if not slots are available
* server: document new status no slot available in the README.md
* Added numa options to allow finer grained control as well as plumbing for a new mirror mode that will require numa.h
* Reverted Makefile
* Fixed include
* Removed sched.h from ggml.h, moved ggml_get_numa_affinity into ggml.c, removed trailing whitespace and fixed up a few inconsistent variables
* removed trailing whitespace
* Added numa options to allow finer grained control as well as plumbing for a new mirror mode that will require numa.h
* Reverting Makefile
* Fixed a number of issues with the move from BOOL to ggml_numa_strategies. Added a note about mirror mode note being implemented yet
* Removing MIRROR_MODE code for this PR
* Removing last bit of MIRROR_MODE code for this PR
* Removing unneeded branch in server.cpp example and moving get_numa_affinity and making it static
* Fixed lingering init_llama_backend() bool calls in tests and examples
* Remote enum llama_numa_strategies
* Revert bad merge with dynatemp flags
* add missing enum ggml_numa_strategies declaration and revert sync problem with master
* add missing enum ggml_numa_strategies declaration
* fixed ggml_init_numa variable
* Update ggml.h
Co-authored-by: Jared Van Bortel <cebtenzzre@gmail.com>
* Update READMEs with info about numa flags, change INTERLEAVE strategy name to DISTRIBUTE everywhere, implement the improved distribution strategy from @rankaiyx, fix a spelling mistake and un-merge some bad merges
* split numa init out from llama_backend_init and created llama_numa_init. Updated all code paths and samples
* Fix up some boolean vs enum comparisons
* Added #ifdefs for non-Linux OS that don't have cpu_set_t datatype
* Update ggml.h
Align enum values
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Update ggml.c
Remove whitespace
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Update ggml.c
align paremeters
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Update examples/server/server.cpp
remove whitespace and align brace
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* Update common/common.cpp
Remove whitespace and align brace
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* unified ggml_numa_strategy enum and fixed text alignment in server.cpp example
* Update ggml.c
simplified return for platforms without NUMA support
Co-authored-by: Jared Van Bortel <cebtenzzre@gmail.com>
* removed redundant else from cli argument processing of --numa
* whitespace
---------
Co-authored-by: root <root@nenya.lothlorien.ca>
Co-authored-by: Jared Van Bortel <cebtenzzre@gmail.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
Co-authored-by: Jared Van Bortel <jared@nomic.ai>
* Fix memory management in llava and server code
Fixes this error:
llama_new_context_with_model: graph splits (measure): 3
Available slots:
-> Slot 0 - max context: 6000
{"timestamp":1707926446,"level":"INFO","function":"main","line":2623,"message":"model loaded"}
all slots are idle and system prompt is empty, clear the KV cache
slot 0 - loaded image
slot 0 is processing [task id: 0]
slot 0 : kv cache rm - [0, end)
slot 0 - encoding image [id: 1]
munmap_chunk(): invalid pointer
Aborted
* Make it cleaner by checking size in batch free wrapper
* Create llava-survery-v2.py
* Update convert-image-encoder-to-gguf.py
* Update convert-image-encoder-to-gguf.py
* Rename llava-survery-v2.py to llava-surgery-v2.py
* Update convert-image-encoder-to-gguf.py
will now search for projector
* Update convert-image-encoder-to-gguf.py
whoops
* Update llava-surgery-v2.py
* Clip: Bugfix for normalization (it did not loat the 3 std and mean values)
Clip: bicubic resize function
Clip: added save-to-bmp/pil for debugging and conversion from/to 32/8 images
Clip: added normalization with FP16 precision simulation (image tensors match HF implementation, can be switched off, only used for llava-1.6)
Clip: added newline tensor, mergetype kv, image-grid kv, new resize-pad function with resolution from gridpoints
Clip: clip_image_preprocess now returns a float * vector instead of float, this way llava 1.5 and 1.6 is supported
llava: added ggml cpu graph for embedding patching, added spatial_unpad preliminary support, added a lot of comments that need to be cleaned when all is final
convert-image-encoder: fixed image-grid flattening
* whitespace corrections
* ws
* Tensors are now properly permuted.
Before the embeddings were inserted 1:1, now they are split into the 24x24 patches as in reference.
* ws
* added verbose_prompt support into cli
added stopwords for llava-1.6 into cli
* moved llava functions to llava.cpp, made clip.h C compatible API, replaced vector style functions with pointers, added a debug define to remove functions from compilation while not needed
* ws
* convert : skip unknown tensors (need for LLaVA)
* llava : update readme
* llava : fix compile warnings
* llava : style
* convert : add --skip-unknown CLI arg
* server : remove clip structs
* bugfix for non llava-1.6
It should now work with llava-1.5 as well
* clip : minor code rearrange
* llava : update readme a bit
---------
Co-authored-by: John <cmt-nct@users.noreply.github.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* server: allow to specify tokens as strings in logit_bias
* Apply suggestions from code review
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* include total "num_slots" in default_generation_settings_for_props
* cleanup total_slots return value in /props endpoint
* update /props endpoint docs with total_slots
* remove num_slots from default_generation_settings_for_props
* update /props endpoint section
